Ctcss/Dcs/Epcs Operation; Ctcss Operation; Dcs Operation - Yaesu FTM-350 Operating Manual

CTCSS/DCS/EPCS O
1. Press and hold in the [ F ] key for two seconds to change the [ SMART FUNCTION ]
key category to the "SQL" functions.
2. Press the [ TYPE ] key repeatedly, until the "TONE SQL" notation appears; this acti-
vates the CTCSS operation.
3. Press the [ T FRQ ] key, then rotate the "Main" band's [ DIAL ] knob to select the de-
sired CTCSS frequency.
4. Press the [ ESC ] key to save the new setting and exit to normal operation.
5. To end the CTCSS operation, press the [ TYPE ] key repeatedly, until the "OFF" nota-
tion appears.
You may customize the CTCSS operation so that a ringing "bell" sound alerts you when a
call is coming in. Use Set Mode item "J01 BELL RINGER" in the "SIGNALING" group.
See page 45 for details.
1. Press and hold in the [ F ] key for two seconds to change the [ SMART FUNCTION ]
key category to the "SQL" functions.
2. Press the [ TYPE ] key repeatedly, until the "DCS" notation appears; this activates the

DCS operation.

3. Press the [ D COD ] key, then rotate the "Main" band's [ DIAL ] knob to select the de-
sired DCS code.
4. Press the [ ESC ] key to save the new setting and exit to normal operation.
5. To end the DCS operation, press the [ TYPE ] key repeatedly, until the "OFF" notation
appears.
You may customize the DCS operation so that a ringing "bell" sound alerts you when a call
is coming in. Use Set Mode item "J01 BELL RINGER" in the "SIGNALING" group.
See page 45 for details.
When operating the APRS with the Voice Alert function (see page 79 on the FTM-
350 Series APRS Manual for details), the CTCSS frequency/DCS code which is
set on the left side band will replace the CTCSS frequency/DCS code which is set
by the Voice Alert function automatically.
14
CTCSS O
DCS O
Important Note
FTM-350 S O M