Scan Operation; Vfo Scan; Memory Scan - Yaesu FTM-350 Operating Manual

S O
1. Press the [ F ] key repeatedly until the [ SMART FUNCTION ] keys "F-1" category is
displayed. Then, if necessary, set the "Main" band to VFO mode by pressing the [ V/M ]
key on the "F-1" category.
2. Press the [ F ] key briefly to change the [ SMART FUNCTION ] keys to the "F-2" cat-
egory.
3. Press the [ SCAN ] key on the "F-2" category to initiate the VFO scan.
4. Press the [ SCAN ] key again to stop the VFO scan.
You may customize the functions of the VFO Scan using the following Set Mode items:
"F02 SCAN DIRECTION", "F03 SCAN RESUME", "F04 SCAN STOP BEEP" in the
"SCAN" group and "G08 RX COVERAGE" in the "SYSTEM" group.
1. Press the [ F ] key repeatedly until the [ SMART FUNCTION ] keys change to the "F-1"
category, Then, if necessary, set the "Main" band to memory mode by pressing the
[ V/M ] key.
2. Press the [ F ] key briefly to change the [ SMART FUNCTION ] key category to "F-2".
3. Press the [ SCAN ] key on the "F-2" category to initiate the memory scan.
4. Press the [ SCAN ] key again to stop the memory scan.
You may customize the functions of the Memory Scan using Set Mode items "D03
MEMORY SCAN TYPE" in the "MEMORY" group, "D04 MEMORY SKIP/SELCT",
"F03 SCAN RESUME", "F04 SCAN STOP BEEP" in the "SCAN" group, and "G08 RX
COVERAGE" in the "SYSTEM" group.
16
VFO S
M S
FTM-350 S O M