Installing The Postscript 3 Printer Driver (Windows Nt 4.0) - Ricoh Aficio MP 2500SPF Supplement Manual

Note
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
❒ Auto Run may not work with certain operating system settings. In that
case, launch "Setup.exe" on the CD-ROM root directory.

Installing the PostScript 3 Printer Driver (Windows NT 4.0)

Important
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
❒ If you print from a print server connected to the printer using the DeskTop
Binder-SmartDeviceMonitor port, the client cannot use Recovery Printing
and Parallel Printing.
❒ To print from a Windows NT 4.0 print server, install the printer driver before
you connect the print server to the printer.
❒ If your operating system is Windows NT4.0, download printer driver for
Windows NT4.0 from the supplier's Web site.
A
Double-click on "SETUP.EXE" in the downloaded folder.
Add Printer Wizard starts.
B
Click [Network printer server], and then click [Next >].
C
Double-click the computer name you want to use as a print server in the
[Shared printers] window.
D
Select the printer you want to use, and then click [Next >].
E
Check the location of the selected printer is shown, and then click [Next >].
F
Change the printer name if you want, and then click [Next >].
G
Specify whether or not to print a test page, and then click [Finish].
Restart the computer to complete installation.
Note
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
Using as the Windows Network Printer
1
27