Changing To Ethertalk - Ricoh Aficio MP 2500SPF Supplement Manual

G
Select the model you are using in [Select a USB Printer:], and then click [OK].
H
Click [Create].
The following message appears.
I
Click [Save].
J
Specify the file location and the name, and then click [Save].
The printer icon appears on the desktop.
K
Quit Desktop Printer Utility.
Note
❒ Mac OS supports only the standard USB ports for this printer.
❒ When printing with a USB connection to a Macintosh computer, printer
language does not change automatically. Use the control panel on this
printer to change printer language to [Auto Detect] or [PS] before printing.

Changing to EtherTalk

Follow the procedure below to configure to a Mac OS to use EtherTalk.
A
Open [Control Panel], and then double-click the AppleTalk icon.
B
On the [Connect via:] pop-up menu, click [Ethernet].
C
If you change zones, select a name on the [Current zone:] pop-up menu.
D
Close the AppleTalk control panel.
E
Restart the computer.
Note
❒ The procedures used to configure Mac OS may vary depending on the Mac
OS version. The following describes how to configure Mac OS 9.1. If you
are using a different version of Mac OS, use the following procedures as a
reference and see the manuals for your Mac OS version.
❒ Confirm the Connection to the Printer with TCP/IP
Reference
For information about installing applications required for EtherTalk, see
the Mac OS manuals.
Mac OS
2
55