Installing The Postscript 3 Printer Driver (Windows Nt 4.0) - Ricoh Aficio MP 2500SPF Supplement Manual

Installing the PostScript 3 Printer Driver (Windows NT 4.0)

Important
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
❒ If your operating system is Windows NT4.0, download printer driver for
Windows NT4.0 from the supplier's Web site.
A
Double-click on "SETUP.EXE" in the downloaded folder.
Add Printer Wizard starts.
B
Select [My Computer], and then click [Next >].
C
Click [Add Port...].
D
Select [LPR Port], and then click [New Port...].
E
Enter the printer's IP address in the [Name or address of server providing lpd]
box.
F
Enter "lp" in the [Name of printer or print queue on that server:] box, and then
click [OK].
G
Click [Close] to close the [Printer Port] dialog box.
H
Click [Next >].
I
Check that the name of the machine whose driver you want to install is se-
lected, and then click [Next >].
J
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
K
Specify whether or not to share the printer, and then click [Next >].
L
Specify whether or not to print a test page, and then click [Finish].
The printer driver installation starts.
M
Restart the computer to complete installation.
Note
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
Using the LPR Port
23
1