Steelcase Think 46540100 Assembly Instructions

Think Chair Assembly Instructions
®
1. Lift seat depth adjustment handle, found
under the front edge of the seat (1a).
Hold the handle up and slide the seat all
the way forward (1b).
2. Lay the chair's back frame on top of the
seat and align the back stops (2a).
Holding onto the bottom of the back
frame, rotate the back frame up until the
back stops connect (2b).
3. Using the enclosed Allen-wrench, install
screws on both sides of the back frame.
Tighten screws.
4. Please keep the original packaging
materials for 14 days to facilitate a return
if necessary (see warranty statement for
details). After this period, we encourage
you to recycle the packaging material.
If you have any questions, problems or
requests please contact us at
888.STEELCASE (1.888.783.3522).
Outside the U.S.A., Canada, Mexico,
Puerto Rico, and the U.S. Virgin
Islands call 1.616.247.2500.
Adjust Your Think Chair to Fit You
The Think chair adjusts itself to your body. Simply sit and don't give it another thought. If you'd like to fine
tune your chair, the card attached to the chair explains how. Additionally, you can print a PDF user guide and
watch a demonstration of how to adjust your chair for the best ergonomic fit on our web site: steelcase.com.
Think of the Future
Many years from now, when your Think chair reaches the end of its useful life, it is designed to be easily
separated for recycling in about five minutes using common hand tools. For disassembly and recycling
instructions, call 888.STEELCASE or go to steelcase.com.
© 2005 Steelcase Inc. All rights reserved. Printed in the U.S.A. Part No. 939546513 Rev A
This package
includes:
2 screws
Allen-wrench