Advertisement
Quick Links
®
™
Duo
Tall Storage Mounted on Montage
3/32" DIAMETER
If you have a problem, question, or request, call
DRILL BIT
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©
2006 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Page 1 of 8
Printed in U.S.A.
939500188 Rev C
Advertisement
Related Manuals for Steelcase Duo Tall Storage Mounted on Montage
Summary of Contents for Steelcase Duo Tall Storage Mounted on Montage
- Page 1 3/32" DIAMETER If you have a problem, question, or request, call DRILL BIT your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by people who want to help you. (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S.
- Page 2 9" With a pencil, mark the measurements as indicated (1a). Align the mounting bracket as MOUNTING shown and mark the hole locations (1b). Using BRACKET a 3/32" drill bit, drill two (2) holes 1/4" deep (1c). Attach the mounting bracket to the side of the 5"...
- Page 3 Align column base to column. Attach using four (4) 1/4-20 x 1" flat head screws (2b). 1/4-20 x 1" FLAT COLUMN HEAD SCREWS BASE COLUMN Page 3 of 8 939500188 Rev C...
- Page 4 Underside of Tall Storage Unit (Column End) 9" Flip the tall storage unit over and mark with a pencil the measurements as shown. 6" 18" Align the column perpendicular to the wall. Adjust distance from wall according to the tall storage length being used.
- Page 5 NOTE: If installing a cantilevered worksurface under the tall storage unit, install the cantilever and the mounting plate before step 6. Lower the tall storage unit into place (6a) by sliding the mounting bracket into the slots on the wall (6b) and placing the other end of unit upon the column (6c).
- Page 6 Underside of Tall Storage Unit (Column End) DRILL SIX (6) HOLES USING A 3/32" DIA. DRILL BIT, Attach tall storage unit to the duo column 1/4" DEEP by drilling six (6) 3/32" dia. holes, 1/4" deep (8a). Attach using six (6) #8-18 x 5/8" flat head screws (8b).
- Page 7 UNDERSIDE OF TALL STORAGE UNIT Place the mounting bracket against the panel and underneath the MOUNTING tall storage unit (10a). With a pencil, BRACKET mark the two (2) hole locations of the bracket onto the underside of the tall storage unit (10b). Remove the bracket and drill two (2) 3/32"...
- Page 8 UNDERSIDE OF UNDERSIDE OF TALL STORAGE UNIT WORKSURFACE DRILL TWO (2) HOLES USING A 3/32" DIA. DRILL BIT, 1/4" DEEP Install worksurface. MOUNTING BRACKET With the worksurface installed and resting upon the mounting bracket (12a) drill two (2) 3/32" dia. PANEL holes, 1/4"...