Advertisement
Quick Links
®
iBoard
by APS
READ INSTRUCTIONS CAREFULLY BEFORE START ING
INSTALLATION. REMOVE CONTENTS FROM BOX AND
VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS
RECOMMENDED.
*ROCKER PANEL MOUNT
*NO DRILLING REQUIRED
PART LIST
Driver Side Step Bar
iBoard
Front
1#
1#
Customer Support: info@iboardauto.com
1
®
Fastener Size
Tightening Torque (ft-lbs)
6mm
8mm
10mm
12mm
14mm
1#
1#
PART#: IB-296C&H
Required
6-7
X
16-18
√
31-32
X
56-58
X
92-94
X
Passenger Side Step Bar
Rev. 20230201
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for APS iBoard IB-296C
Summary of Contents for APS iBoard IB-296C
- Page 1 ® ® iBoard by APS PART#: IB-296C&H Fastener Size Tightening Torque (ft-lbs) Required READ INSTRUCTIONS CAREFULLY BEFORE START ING INSTALLATION. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS 16-18 √ RECOMMENDED. 10mm 31-32 12mm 56-58...
- Page 2 iBoard ® Mounting Bracket List Item Description Item Description Mounting Brackets Hardware Package A (For Bracket Installation) Item Description Item Description M8Χ1.25-30mm Hex Bolts M8 Lock Washers M8 Flat Washers Hardware Package B (For Stainless Steel Step Bar Installation) Item Description Item Description...
- Page 3 iBoard ® STEP 1 Starting on the driver side of the vehicle. Locate the (4) plugs along the bottom edge of the body. Remove the plastic plugs from each mounting location, (Fig 1). NOTE: Thread a M8 Hex Bolt into the threaded inserts to clear paint as required.
- Page 4 iBoard ® STEP 4 Repeat Steps 1-4 for the other side Step Bar installation. The installation is completed!!! Once all (2) Driver side mounting brackets are installed, then proceed to the Step Bar installation. (Figs 5 & 6) (1) Select (1) Slider and (2) M8X1.25-35mm Carriage Bolts; Attention (2) Install (2) M8X1.25-35mm Carriage Bolts in (1) Slider.
Need help?
Do you have a question about the iBoard IB-296C and is the answer not in the manual?
Questions and answers