Advertisement
Quick Links
®
iBoard
by APS
READ INSTRUCTIONS CAREFULLY BEFORE START ING
INSTALLATION. REMOVE CONTENTS FROM BOX AND
VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS
RECOMMENDED.
*ROCKER PANEL MOUNT
*NO DRILLING REQUIRED
PART LIST
Driver Side Step Bar
iBoard
1#
2#
2#
Customer Support: info@iboardauto.com
Fastener Size
Tightening Torque (ft-lbs)
6mm
8mm
10mm
12mm
14mm
Front
1
®
PART#: IB-280C&H
Required
6-7
16-18
31-32
56-58
92-94
Passenger Side Step Bar
1#
2#
2#
Rev. 20230201
X
√
X
X
X
Advertisement
Related Manuals for APS iBoard IB-280C
Summary of Contents for APS iBoard IB-280C
- Page 1 ® ® iBoard by APS PART#: IB-280C&H Fastener Size Tightening Torque (ft-lbs) Required READ INSTRUCTIONS CAREFULLY BEFORE START ING INSTALLATION. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS 16-18 √ RECOMMENDED. 10mm 31-32 12mm 56-58...
- Page 2 iBoard ® Mounting Bracket List Item Description Item Description Driver & Passenger Front Mounting Bracket Mounting Brackets Hardware Package A (For Bracket Installation) Item Description Item Description M8X1.25-30mm Hex Bolts M8 Lock Washers M8 Large Flat Washers Hardware Package B (For Stainless Steel Step Bar Installation) Item Description Item...
- Page 3 iBoard ® STEP 1 STEP 3 Move to the passenger side center and rear mounting loca- Start installation on the passenger side of the vehicle, remove tions. Repeat Steps 1-2 to install the Passenger Center Mount- the existing (2) factory bolts located by the front tire opening, ing Bracket and Passenger Rear Mounting Bracket (Fig 3 &...
- Page 4 iBoard ® (3) Slide the Slider (with carriage bolts) to the Step Bar. Attention (4) Repeat to install the other (2) sliders to the step bar. (5) Attach the Step Bar (with the Sliders) onto the installed Do periodic inspections to the installation to make sure mounting brackets.
Need help?
Do you have a question about the iBoard IB-280C and is the answer not in the manual?
Questions and answers