Aps premium 6in black running boards compatible with ford transit full size van 15-25 (10 pages)
Summary of Contents for APS iBoard IB-115C
Page 1
® ® iBoard by APS PART#: IB-115C&H Fastener Size Tightening Torque (ft-lbs) Required READ INSTRUCTIONS CAREFULLY BEFORE START ING INSTALLATION. REMOVE CONTENTS FROM BOX AND √ VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS 16-18 √ RECOMMENDED. 10mm 31-32 12mm...
Page 2
iBoard ® Mounting Bracket List Item Description Item Description Driver/Passenger Front Mounting Brackets Driver/Passenger Rear Mounting Brackets Driver/Passenger Center Mounting Brackets Hardware Package A (For Bracket Installation) Item Description Item Description M8Χ1.25-35mm Hex Bolts M6X1-25mm Hex Bolts M8 Large Flat Washers M6 Large Flat Washers M8 Lock Washers M6X1 Nylon Lock Nuts...
Page 3
iBoard ® STEP 1 (2) M6X1-25mm Hex Bolts (4) M6 Large Flat Washers (2) M6X1 Nylon Lock Nuts Start the installation under the driver side of the vehicle. Locate (3) mounting points on the vehicle, (Fig 1). Find the threaded insert located in between the first pair of holes along the pinch weld, (Fig 2).
Page 4
iBoard ® Level and adjust the Step Bar and fully tighten all hardware. Attention Repeat Steps 1-4 for the other side Step Bar installation. The Do periodic inspections to the installation to make sure installation is completed!!! that all hardware is secure and tight. In order to protect your bars/boards, please use mild soap/non-abrasive products for cleaning only.
Need help?
Do you have a question about the iBoard IB-115C and is the answer not in the manual?
Questions and answers