Download Print this page

APS iBoard IB-189C Manual

Black 5 inches 304 stainless steel running boards nerf bars side steps compatible with ford f150 2015-2024 regular cab & f-250 f-350 super duty 2017-2024

Advertisement

Quick Links

®
iBoard
by APS
READ INSTRUCTIONS CAREFULLY BEFORE START ING
INSTALLATION. REMOVE CONTENTS FROM BOX AND
VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS
RECOMMENDED.
*ROCKER PANEL MOUNT
*NO DRILLING REQUIRED
PART LIST
Driver Side Step Bar
iBoard
Front
1#
1#
Customer Support: info@iboardauto.com
Fastener Size
Tightening Torque (ft-lbs)
6mm
8mm
10mm
12mm
14mm
1
®
PART#: IB-189C&H
Required
6-7
16-18
31-32
56-58
92-94
Passenger Side Step Bar
1#
1#
Rev. 20230301
X
X
X
X

Advertisement

loading
Need help?

Need help?

Do you have a question about the iBoard IB-189C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for APS iBoard IB-189C

  • Page 1 ® ® iBoard by APS PART#: IB-189C&H Fastener Size Tightening Torque (ft-lbs) Required READ INSTRUCTIONS CAREFULLY BEFORE START ING INSTALLATION. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS 16-18 √ RECOMMENDED. 10mm 31-32 12mm 56-58...
  • Page 2 iBoard ® Mounting Bracket List Item Description Item Description Mounting Brackets Hardware Package A (For Bracket Installation) Item Description Item Description M8 Plastic Washers M8X1.25 Nylon Lock Nuts M8 Large Flat Washers Hardware Package B (For Stainless Steel Step Bar Installation) Item Description Item...
  • Page 3 iBoard ® STEP 1 STEP 3 Start the installation under the passenger side of the vehicle. Select (1) Mounting Bracket. NOTE: All (4) Brackets are univer- Locate the front factory running board mounting location along sal and will fit left or right side for front, rear mounting location. the inner side of the body, (Fig 1).
  • Page 4 iBoard ® Attention Note: The Sliders are packed with the Step Bars. Do periodic inspections to the installation to make sure Level and adjust the Step Bar and fully tighten all hardware. that all hardware is secure and tight. Repeat Steps 1-5 for the other side Step Bar installation. The In order to protect your bars/boards, please use mild installation is completed!!! soap/non-abrasive products for cleaning only.

This manual is also suitable for:

Iboard ib-189h