T-Rex 55195 Manual

55195
07-12 CADILLAC
E SCA LA DE
UPPER CLASS SERIES MESH BUMPER – FLUSH MOUNT
Tools Required:
Phillips & Slotted Screw Drivers
7mm, 8mm, 10mm & 18mm Socket
Drill & 1/8" Bit
Jacks, Jack-stands or Ramps
Read and understand instructions before attempting installation
Step 4
Center one on the grilles in place. Use the ½ x ½ brackets to secure the upper mounting studs. Attach
the J hooks to the bottom studs. Install the washers and nuts. Make sure the brackets wrap around the
bumper cover. Tighten the hardware until the grille is firmly held in place.
Thank you for purchasing a T-Rex billet grille.
2007-12 Cadillac Escalade
Access the tow hooks from below the bumper. It may be easier if the
front of the vehicle is raised on jack stands or ramps. Use an 18mm
socket and wrench to remove the factory tow hooks from the frame.
Step 3
Use a slotted screwdriver to unclip and remove the factory plastic
tow hook covers.
Parts List:
2 Upper Class Grilles (Right & Left)
6 6-32 Nylon Lock Nuts
6 #6 Flat Washers
4 ½ x ½ L Brackets
2 1.5" J Hooks
Step 1
5/31/07
55195
07-12 CADILLAC
E SCA LA DE