Advertisement
Quick Links
Parts included
(1) Billet - Bumper Grille - Overlay
Part #254641 - Polished
OR
Part #254641B - Black
Hardware included
(2) - 6-32 Black Toggle Wings
(2) - Black Stainless Steel Button
Head Screws
Tools Required
- Screwdriver set
- Needle Nose Pliers
- 1/2" Plastic Spatula
Page 1
BILLET Series Grille
Bumper grille OVERLAY #254641 / #254641B
2017 DODGE RAM REBEL 1500
GRILLE REMOVAL & Grille Installation Guide
START HERE
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION.
Auto makers off er varied models to each vehicle and occasionally manufacture more
than one body style of the same model. To assure your part is correct; our tech
department can be contacted at tech@trexbillet.com to verify fi tment and assist with
technical questions. All other inquires can be directed to info@trexbillet.com. In the
event you do not have internet access please call 1-800-287-5900.
* APPLICATION MODELS VARY. WE RECOMMEND TO VERIFY FITMENT BEFORE BEGINNING INSTALLATION PROCESS.
* IMAGES FEATURED IN THE INSTRUCTION DOCUMENTS MAY NOT ALWAYS EXACTLY MATCH YOUR GRILL.
FRONT BUMPER REMOVAL
STEP 1
1) Turn off engine and chalk tires with
stop block.
Open Hood. Disconnect Battery.
This grille installs as a overlay and will cover the OEM factory grille
without any required permanent modifi cations.
FIG 1
STEP 2
2) Begin with assembling the hardware by
slipping the provided screws through the
pre-determined mounting provisions and then
thread the toggle wings properly as indicated in
Figure #2.
PRO TIP:
Before you begin, use "3M Painters Tape" to
apply a protective guard around the work areas.
Attend to the fender and bumper valance. This will
help protect the paint and fi nish of your vehicle.
FIG 2
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for T-Rex 254641B
Summary of Contents for T-Rex 254641B
- Page 1 BILLET Series Grille Bumper grille OVERLAY #254641 / #254641B 2017 DODGE RAM REBEL 1500 GRILLE REMOVAL & Grille Installation Guide Parts included (1) Billet - Bumper Grille - Overlay START HERE PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION. Auto makers off er varied models to each vehicle and occasionally manufacture more Part #254641 - Polished than one body style of the same model.
- Page 2 BILLET Series Grille GRILLE Install - Continued Bumper grille OVERLAY #254641 / #254641B 2017 DODGE RAM REBEL 1500 FIG 3 FIG 4 STEP 3 SEE FIGURES 3 - 5 3) It is now time to mate up the grille overlay over the factory bumper grille opening.
- Page 3 SEE FIGURES 17 - 19 7) At this point you want to look over your work and examine the gap alignments around all edges and in between the new T-REX Grille and the vehicle components and body lines. Carefully close the hood for a complete visual inspection. If adjustment is needed, you can remove grille and loosen the hardware mounts and shift side to side or up &...
- Page 4 POLISHED FINISH T-REX polished grilles should be waxed at the same time that you wax the vehicle and can be cleaned with soap and water. A polished fi nish can be cared for in the same fashion that would care for your vehicles factory chrome. Never leave wet water spots as that may leave a blemish.
Need help?
Do you have a question about the 254641B and is the answer not in the manual?
Questions and answers