Parts included
(1) Upper Class Grille - Main
2 PC Overlay - Black - Part #51214
2 PC Overlay - Polished SS - Part #54214
Hardware included
(6) -3.5" Wide Flange Brackets
(6) - #8 x 2" Hard Anodized Black
Oval Head Screws
(6) - #8 Flat U Nuts
Tools Required
- Screwdriver set (Phillips)
- 1/2" Plastic Spatula Wedge
Page 1
2016-2017 GMC SIerra 1500
START HERE
OR
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION.
Auto makers offer varied models to each vehicle and occasionally manufacture more
than one body style of the same model. To assure your part is correct; our tech
department can be contacted at tech@trexbillet.com to verify fitment and assist with
technical questions. All other inquires can be directed to info@trexbillet.com. In the
event you do not have internet access please call 1-800-287-5900.
* APPLICATION MODELS VARY. WE RECOMMEND TO VERIFY FITMENT BEFORE BEGINNING INSTALLATION PROCESS.
* IMAGES FEATURED IN THE INSTRUCTION DOCUMENTS MAY NOT ALWAYS EXACTLY MATCH YOUR GRILL.
FRONT BUMPER REMOVAL
STEP 1
1) Turn off engine and chalk tires with
stop block.
Open Hood. Disconnect Battery.
STEP 2
2) Begin by assembling
your T-Rex Grille Overlay
with the provided screws.
Next slide the Flat U Nuts
over the Flange Brackets
as seen in Figure #2.
Thread the assembled
Flange Brackets onto and
over the screws to prepare
for installation.
Make sure the Flange curve their wings back to the grille. Repeat the steps on the
bottom piece of the 2 piece Grille Overlay. Confirm the T-Rex 2 PC Grille Overlays will
be compatible with your grille pattern.
FIG 2
Upper Class Grille
Main grille Overlay - #51214 / #54214
GRILLE REMOVAL & Grille Installation Guide
PRO TIP:
Before you begin, use "3M Painters Tape" to
apply a protective guard around the work areas.
Attend to the fender and bumper valance. This will
help protect the paint and finish of your vehicle.
FIG 1
SEE FIGURES 1 - 3
FIG 3