Advertisement
Quick Links
NOTE BEFORE INSTALL:
Your factory grille components and other vehicle front end
features may be visible once your new grille is fully installed.
To counter this visual element, we have found that you can
hide or mostly eliminate the components by blacking out with
flat black aerosol spray paint, plasti-dip or any other similar
product. If you choose to take on this extra modification, you
are advised to mask off any parts or panels that you do not
wish to paint over.
T-REX TRUCK PRODUCTS DOES NOT TAKE ON ANY
RESPONSIBILITY FOR THIS ADDITIONAL MODIFICATION.
Parts included
(1) Main Grille Replacement
Polished (Full Opening) - Part
Black (Full Opening)
- Part #54267 OR
Polished (2 Bar)
- Part #51268 OR
Black (2 Bar)
- Part #54268
Hardware included
(1) Grille Mount Top Plate
(2) Grille Support Tab Brackets
(2) Front Mounting Brackets
(8) #3-32 Nylon Nuts
(8) #6 Zinc Plated Washers
(10) #8 Phillips Self-Tightening Screws
(10) #8 Long U-Nuts
(2) #8 x 1.25" 6 head screws
(2) #8 U-Nuts
(4) M8 Hex Nuts
(4) #10 Zinc Plated Washers
(2) Flat Push Nuts
*Support Tab Brackets
*Front Mounting Brackets
Tools Required
- Socket Set
- Torx Bit Set
- Socket Extension
- Screwdriver Set
- Basic Wrench Set - Flash Light
Page 1
UPPER CLASS SERIES Grille
Main grille - #51267/#54267/#51268/#54268
2015 CHEVROLET COLORADO
START HERE
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION.
Auto makers offer varied models to each vehicle and occasionally manufacture more
than one body style of the same model. To assure your part is correct; our tech
department can be contacted at tech@trexbillet.com to verify fitment and assist with
technical questions. All other inquires can be directed to info@trexbillet.com. In the
event you do not have internet access please call 1-800-287-5900.
* APPLICATION MODELS VARY. WE RECOMMEND TO VERIFY FITMENT BEFORE BEGINNING INSTALLATION PROCESS.
* IMAGES FEATURED IN THE INSTRUCTION DOCUMENTS MAY NOT ALWAYS EXACTLY MATCH YOUR GRILL / VEHICLE.
#51267 OR
STEP 1
1) Turn off engine and chalk tires
with stop block. Open Hood.
STEPS 2-4
2) Layout and assemble your Grille Kit. First You will need to fit the Grille Mount Top
Plate to the grille's inner lip located on the
top side frame. Use the (8) Nylon Nuts
and (8) Zinc Plated Washers.
3) Now you are ready to move onto the
removal of vehicle's front bumper fascia.
Start under the nose of the vehicle,
remove (6) more screws to loosen exterior
bottom bumper fascia component.
FIG 2
DISASSEMBLY
Grille Installation Guide
PRO TIP:
Before you begin, use "3M Painters Tape" to apply
a protective guard around the work areas. Attend
to exposed chrome, fender bumper valance. This
will help protect the paint and finish of your vehicle.
SEE FIGURES 1 - 3
FIG 1
FIG 3
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for T-Rex UPPER CLASS Series
Summary of Contents for T-Rex UPPER CLASS Series
- Page 1 To assure your part is correct; our tech T-REX TRUCK PRODUCTS DOES NOT TAKE ON ANY department can be contacted at tech@trexbillet.com to verify fitment and assist with RESPONSIBILITY FOR THIS ADDITIONAL MODIFICATION.
- Page 2 UPPER CLASS SERIES Grille GRILLE INSTALL - Continued Main grille - #51267/#54267/#51268/#54268 2015 CHEVROLET COLORADO STEPS 4 - 6 SEE FIGURES 3 - 7 4) Remove (10) screws to loosen and remove wheel well fender liner. 5) In the front wheel well peel back the fender liner to access the (3) 7mm bolts that fix lower bumper to front fender.
- Page 3 UPPER CLASS SERIES Grille GRILLE INSTALL - Continued Main grille - #51267/#54267/#51268/#54268 2015 CHEVROLET COLORADO OPTIONAL Factory BADGE INSTALL - START BADGE INSTALL STEP 1 1) This next section is for those that desire to retain their factory OEM Chevy “Bow Tie”...
- Page 4 UPPER CLASS SERIES Grille GRILLE INSTALL - Continued Main grille - #51267/#54267/#51268/#54268 2015 CHEVROLET COLORADO Grille / BUMPER FASCIA REMOVED FROM Vehicle STEP 10 SEE FIGURE 11 - 14 10) With the front fascia assembly removed and set down on a flat cushioned surface, use a flat head screwdriver and carefully pry in to release (10) plastic tabs that holds the grille in place and secured to the front bumper fascia.
- Page 5 UPPER CLASS SERIES Grille GRILLE INSTALL - Continued Main grille - #51267/#54267/#51268/#54268 2015 CHEVROLET COLORADO Grille / BUMPER FASCIA REMOVED FROM Vehicle STEP 14 & 15 SEE FIGURE 18 14) Attach grille support tab brackets to inside grille lip studs and tighten using provided hardware.
- Page 6 UPPER CLASS SERIES Grille GRILLE INSTALL - Continued Main grille - #51267/#54267/#51268/#54268 2015 CHEVROLET COLORADO Grille / BUMPER FASCIA Installed on Vehicle STEP 18 18) In the front wheel wells, peel back fender liner to fix the 7mm bolts that secure the lower bumper to front fender.
-
Page 7: Installation Complete
SEE FIGURES 4 & 5 24) At this point you want to look over your work and examine the gap alignments around all edges and in between the new T-REX Grille and 3) On each side of the front tires, using a flat screwdriver remove plastic clips. - Page 8 POLISHED FINISH T-REX polished grilles should be waxed at the same time that you wax the vehicle and can be cleaned with soap and water. A polished finish can be cared for in the same fashion that would care for your vehicles factory chrome. Never leave wet water spots as that may leave a blemish.
Need help?
Do you have a question about the UPPER CLASS Series and is the answer not in the manual?
Questions and answers