T-Rex 51433 Manual

51433
54433
54434
11-13
Chrysler 300C
TOOLS REQUIRED:
Plastic Prybar
10mm & 7mm Socket Wrench
3/16 Drillbit & Drill
Screwdriver
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS
BEFORE ATTEMPTING INSTALLATION.
Step 1 Factory Grille Shell Removal
• Remove 8 clips on the Plastic Cover. (Fig. 1)
• Carefully pull on Grille Shell to remove part of the Plastic Cover. (Fig. 2)
• With a Plastic Prybar Unclip the Plastic Cover from the Factory Grille Shell. (Fig. 3)
• Remove Plastic Cover. (Pull Grille Shell Carefully outward if Plastic Cover doesnt
come off.)
• Remove 2 clips on side Fender Well. (Fig. 4)
• Remove 10mm Bolt on the inner Fender. (Fig. 5)
• Pull Side Fender outward to Unclip. (Fig. 6)
• Remove 8 (7mm) Screws from Underneath the Factory Grille Shell. (Fig. 7)
• Remove Grille Shell and unclip the Electric Wire from the Fog Lights.
Step 2 Factory Grille Removal
• Remove 2 Clips on the Bumper Support. (Fig. 8)
Fig. 3
Fig 2
Fig 6
5/23/11
11-13 CHRYSLER 300C
Upper Class Mesh Grille
Install time: 30 Mins.
PARTS LIST:
(1) Mesh Grille
(4) 6/32 Nylon Lock Nuts
(4) 3/4 #8 Screws
(4) 10/32 Fender Flatwashers
Fig 4
Fig 7
(4) #8 Flat Nuts
Fig 1
Fig. 2
Fig 2
Fig 5
Fig 8
51433
54433
54434
11-13
Chrysler 300C
Page 1 of 2