Madison Park Welburn MP105-0471 Assembly Instructions

Important safety instructions：
• Please read carefully all instructions before assembly.
• For your safety and ease, assembly by two or more adults is recommended.
• Keep instructions for future use.
Pre-assembly：
• Do not discard any content until assembly is completed to avoid accidentally discarding small parts or
h d
• Take out all parts and hardware from box.
Parts List
Item Description
P1 Left Front Legs
P2 Right Front Legs
P3 Left Back Legs
P4
Right Back Legs
P5
Accent Bench
Hardware List
Description
Item
Bolts
H1
φ5/16*2-1/8"
Lock Washers
H2
φ5/16"
Flat Washers
H3
φ5/16"
Allen Wrench
H4
φ5/16"
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR
ANY DAMAGES RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Assembly Procedures:
Step 1. Assemble the bench on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.To locate the hardware,
please turn the bench upside down, you will find the components beneath the fabric cover that is secured by a Velcro strap
underneath the bench. Lift the strap upwards, legs and hardware box could be located beneath the fabric cover.
Step 2.Using bolts (H1), lock washers (H2), flat washers (H3), connect legs(P1,P2,P3,P4) to bench (P5). Tighten bolts (H1) with
Allen Wrench (H4).
P
Step 3. Place bench upright on a level surface. Assembly is complete.
ADDITIONAL NOTE ABOUT SAFETY:
BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE.
THEY SHOULD BE INSPECTED AT LEAST EVERY 3 MONTHS AND RE-TIGHTENED AS NEEDED TO PREVENT DAMAGE
OR INJURY,
AND ENSURE STABILITY
ASSEMBLY INSTRUCTIONS
Description: Welburn Accent Bench
QTY
1
1
1
1
1
QTY
8
8
8
1
Thank you for your purchase
Page 1 of 1