Madison Park Aidan MP103-0826 Assembly Instructions

Important safety instructions：
• Please read carefully all instructions before assembling.
• For your safety and ease,assembly by two or more adults is recommended.
• Keep instructions for future use.
Pre-assembly：
• Do not discard any content until assembly is completed to avoid accidentally discarding small parts or hardware.
• Remove all parts and hardware from box along with any protective packaging.
Parts List
Item Description
P1 Front Legs
P2 Back Legs
P3 Backrest
P4 Chair Seat
Hardware List
Item Description
H1 Plastic washers
DISCLAIMER:
WHEN PROPERLY ASSEMBLED,THIS ITEM IS SAFE FOR INTENDED USE.SELLER IS NOT LIABLE FOR ANY DAMAGES RESULTING FROM ITEM
BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Assembly Procedures:
Step1. Remove the non-woven cover at bottom of the chair and take out the legs, Screw in the feet (P1&P2) into the screw
holes underneath the base using the plastic washers (H1)
Step2. Insert the small metal arms on the sides of the Chair Backrest(P3) into the prefabricated slide lock gadget on the
Chair Seat(P4) as shown below.
Step3. Put the chair upright on a level surface. Assemble is complete.
ADDITIONAL NOTE ABOUT SAFETY:
BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE.
THEY SHOULD BE INSPECTED AT LEAST EVERY 3 MONTHS AND RE-TIGHTENED AS NEEDED TO PREVENT DAMAGE OR INJURY,AND
ENSURE STABILITY.
DRAWING
QTY
2
2
1
1
DRAWING
QTY
4
Remove the plastic
caps from screw
heads before
H
P
attaching legs.
Thank you for your purchase
ASSEMBLY INSTRUCTIONS
Description:Aidan Recliner chair
H1
Page 1 of 1