Madison Park Hannah Button Tufted Wing Chair Assembly Instructions

Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Take out all parts and hardware from box.
CHAIR
FRONT LEGS
BACK LEGS
H1
Bolts 5/16"x 51mm
H2
Lock Washers 5/16"
H3
Flat Washers 5/16"
Alen Wrench
H4
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR ANY DAMAGES
RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Assembly Procedures:
Assemble the chair on a flat and soft surface either on a carpet or cloth to prevent the finish from
scratching. To locate the hardware, please turn the chair upside down, you will find the components beneath the
fabric cover that is secured by a Velcro strap underneath the seat cushion. Lift the strap upwards, legs and
hardware box could be located beneath the fabric cover.
R
1
2
2
8
8
8
1