T-Rex 20220 Manual

20220
(16220P)
91-93 CHEVY
S-10 & Blazer
BILLET INSERT
PHANTOM
Tools Required:
Die Grinder w/ Cut-off Wheel or Dremel
Drill w/ 1/8" Drill Bit
File or Sandpaper
Rivet Gun
Read and understand instructions before attempting installation
Step 1.
Open the hood and remove the factory grille shell.
Step 2.
Cut the center out of the grille shell; Place the billet from behind the factory shell to help determine how
much material will need to be cut. Do not cut any of the factory mounts needed to install the grille shell
back on the vehicle. File any rough edges smooth.
Step 3.
Center the billet in the grille and hold firmly in place. Drill a 1/8" hole at each insert bracket. Rivet the
insert to the grille.
Step 4.
Re-install the grille assembly back on the vehicle. Installation is now complete.
Thank you for purchasing a T-Rex Billet Grille.
91-93 Chevy S-10 Truck Billet Insert
13 Bar Phantom (No Head Lamp recess Needed)
20220
(16220P)
91-93 CHEVY
S-10 & Blazer
BILLET INSERT
PHANTOM
Hardware / Parts Included:
1 - Billet Insert (13 bars)
6 - 1/8" Rivets
12/24/02 T-Rex Truck Products Inc.