Download Print this page

Groz 45522-48003 Instruction Manual

Electric oil & fuel pump

Advertisement

Quick Links

Electric Oil &
Fuel Pump
Vertical mount fuel and oil pump for
light use in Industrial, Automotive,
Heating and Marine applications
Equipped with a centrifugal electric
motor with double insulation making it
safe for use with water and emulsions
Manufactured from chemically inert
materials
Built in 2" Bung adaptor to fit on most
of the drum sizes
RECOMMENDED USE
Diesel, Kerosene, Water, Emulsions,
Mineral & Synthetic Oils, Heating Oils,
Antifreeze etc.
WETTED COMPONENTS
POM, Polypropylene, Stainless Steel,
Nitrile Rubber, Viton & PTFE
FLUIDS
DIESEL
KEROSENE
SPECIFICATIONS
DESCRIPTION
SUPPLY VOLTAGE
MAX. FLOW RATE
ELECTRIC MOTOR
AMP DRAW FROM THE
BATTERY
ABORBED POWER
INSULATION CATEGORY
DISCHARGE HEAD
DELIVERY HOSE
TANK ADAPTOR
INLET
OUTLET
DISPENSING NOZZLE
BATTERY / POWER CABLE
WATER / DUST PROTECTION
NOISE LEVEL
WORKING TEMPERATURE
RANGE
www.groz-tools.com
3
Dispensing Nozzle
7
On/Off
Switch
2
Rubber Hose
WATER
ANTIFREEZE
EOP/DC/12
12V DC
Upto 9.25 GPM
(35 LPM)
0.43 HP
Centrifugal Motor
9.2 Amp
110 W
III
1 meter
3/4" ID x 2.5 m long
2" & M64x4
Telescopic suction tube extends from 31-1/2" (800 mm) to 43-45/64" (1110 mm)
3/4" Hose Barb
Manual Polypropylene Nozzle
with 3/4" Hose Barb
3 m long with Battery Clamps
IPX 4
(protection against splashing
water)
70 db
−10°C to +40°C
(14°F to 104°F)
5
Lever
OIL
EOP/DC/24
24V DC
110V AC
Upto 9.25 GPM
Upto 10.5 GPM
(35 LPM)
(40 LPM)
0.43 HP
0.43 HP
Centrifugal Motor
Centrifugal Motor
5.6 Amp
2.9 Amp
135 W
320 W
III
II
1 meter
1 meter
3/4" ID x 2.5 m long
3/4" ID x 2.5 m long
2" & M64x4
2" & M64x4
3/4" Hose Barb
3/4" Hose Barb
Manual Polypropylene Nozzle
Manual Polypropylene Nozzle
with 3/4" Hose Barb
with 3/4" Hose Barb
3 m long with Battery Clamps
2 m long with Plug
IPX4
IPX4
(protection against splashing
(protection against splashing
water)
water)
70 db
70 db
−10°C to +40°C
−10°C to +40°C
(14°F to 104°F)
(14°F to 104°F)
INSTRUCTION MANUAL
1
Pump
Body
EOP/AC/110
230V AC
Upto 10.5 GPM
(40 LPM)
0.43 HP
Centrifugal Motor
1 Amp
224 W
II
1 meter
3/4" ID x 2.5 m long
2" & M64x4
3/4" Hose Barb
Manual Polypropylene
Nozzle with 3/4" Hose Barb
2 m long with Plug
IPX4
(protection against
splashing water)
70 db
−10°C to +40°C
(14°F to 104°F)
info@groz-tools.com
S2620, REV B
EOP
6
Trigger
4
Hose Clamp
8
Telescopic Suction Tube
EOP/AC/230
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 45522-48003 and is the answer not in the manual?

Questions and answers

Summary of Contents for Groz 45522-48003

  • Page 1 NOISE LEVEL 70 db 70 db 70 db 70 db WORKING TEMPERATURE −10°C to +40°C −10°C to +40°C −10°C to +40°C −10°C to +40°C RANGE (14°F to 104°F) (14°F to 104°F) (14°F to 104°F) (14°F to 104°F) www.groz-tools.com info@groz-tools.com...
  • Page 2 The motor and switch are not of an anti-explosive type. Do not use the pump in areas where there is risk of explosion Do not use the pump for gasoline, inflammable liquids with PM < 55° C, Food Liquids, Corrosive Chemical Products and Solvents www.groz-tools.com...
  • Page 3 CAUSE SOLUTION Check the electrical connections and safety systems. Contact The motor is not turning Lack of electric power the Service Department The pump is not primed Probable emptying of the intake tube Prime according to the described procedure. info@groz-tools.com...
  • Page 4 This warranty does not apply to damage due directly or indirectly, to misuse, abuse, wear and tear, negligence or accident, repairs or alterations outside GROZ plants, or to lack of maintenance. GROZ shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special or consequential damages arising from the use of its products.

This manual is also suitable for:

Eop/dc/12Eop/dc/24Eop/ac/110Eop/ac/230