Page 1
1. Push the buttons on both sides and open the top cover. 2. Remove the supplied paper roll and tear it apart along the edge.
Page 2
3. Load the paper roll to the paper compartment again and pull some extra paper.
Page 3
Please note: After you put the paper roll into the paper compartment, there are corresponding buckles on both ends of the paper roll. The smaller buckle goes on the left side of the paper slot, while the larger buckle goes on the right side.
Page 4
After pulling the paper roll out, the side of the paper pulled out is at the top, and the slightly white side facing you is the correct orientation.
Need help?
Do you have a question about the MT810 and is the answer not in the manual?
Questions and answers