Factory Restore - DigiTech JAMMAN SOLO Owner's Manual

Factory Restore

This procedure will return the JamMan
loop memories will be reformatted and the original 10 loops that shipped with the
JamMan Solo will be restored. Factory Restore does not affect any loops on the
optional external SD memory card.
WARNING: The Factory Restore procedure will erase all loops from the
JamMan Solo internal memory and restore it to its factory state. This
procedure is permanent and cannot be reversed. Use the Factory Restore
procedure with caution. It is recommended you back up your internal loops
to your computer with the JamManager
1. Press and hold the
2. When the display shows
STORE button again. This display will now show r? asking if you are
3. Press the
sure you want to restore the internal memory to its factory state. To abort this
procedure at this time, press the Pedal Switch.
4. To confirm the restore procedure, press and hold the
appears in the display. The JamMan Solo will return to normal operation shortly as
indicated by loop memory 1 being shown in the display.
®
STORE button while powering up the JamMan Solo.
Fr, release the STORE button which will now be flashing.
Solo to its original factory settings. All internal
software and USB connection.
TM
STORE button until bu
43