Erase All Loop Phrases (Internal Memory) - DigiTech JAMMAN SOLO Owner's Manual

Erase All Loop Phrases (Internal Memory)

The JamMan Solo uses both internal memory and optional external memory for the
®
storage of loop files. You can delete all loops from internal memory or from external
memory without having to delete them one at a time. To delete all loops from internal
memory, follow these steps:
Press and hold the STORE
1
button for four seconds until
(Erase Internal Memory
Loops) appears in the
DISPLAY and release (
will show briefly first but
keep holding the button).
The STORE button will now
be flashing.
34
Press the STORE button
again. The DISPLAY will
2
now read (Erase
Loops?) and the button will
continue to flash. To abort
this procedure, press the
PEDAL SWITCH at any
time.
To erase all loop data,
3
press and hold the STORE
button again for two more
seconds. The DISPLAY
will show (busy)
indicating all internal
memory loops are being
erased.