Changing Loop Tempo - DigiTech JAMMAN SOLO Owner's Manual

Changing Loop Tempo

Once a loop phrase is recorded and stored to memory, you can speed up or slow
down the playback of the phrase without changing its pitch. Storing a changed tempo
is permanent and once completed, the original tempo cannot be restored. To change a
loop's tempo, follow these steps:
Select a previously recorded Loop phrase
1
(LOOP or SINGLE LED is lit) using the LOOP
SELECT buttons. The TEMPO button will
begin flashing at the phrase's stored tempo.
To change the phrase tempo, tap the
2
TEMPO button two or more times while
the loop is either stopped or playing.
Tapping quicker than the stored tempo
rate will speed up playback while tapping
slower than the stored tempo rate will
slow down playback.
Press the STORE button twice to store Tempo changes if desired. You can play along
with the adjusted playback speed and still be in tune since the pitch does not change
based on playback speed.
To return to the original
3
tempo, press and hold the
TEMPO button for two
seconds and the phrase
will return to the original
stored tempo.
The STORE button will
4
light to indicate any
changes to the phrase
tempo and these changes
must be stored if it is to
be recalled later.
25