Factory Reset; Updating Firmware - DigiTech SDRUM Owner's Manual

Factory Reset

Performing the factory reset will return the SDRUM back to its original factory default settings:
• All 36 songs will be erased.
• The guitar calibration profile will be erased.
• The count-in feature will be disabled.
• CLEAN will be selected as the default drum kit.
To perform a factory reset:
WARNING: Performing the factory reset will irreversibly delete all 36 songs. Once performed, this procedure
is irreversible.
1. Unplug the power adapter from the SDRUM.
2. Press and hold the KICK pad, SNARE pad, and ALT (GROOVE/KIT) button, and then plug in the power
adapter.
3. Wait for the LEDs to begin circling the HATS/RIDES encoder, then release the buttons.
4. When the LEDs surrounding the HATS/RIDES encoder begin flashing amber, press the HATS/RIDES
encoder and wait for the factory reset to complete. The HATS/RIDES LEDs will cycle red, then amber, then
green during the reset, and once complete, the SDRUM will return to normal operation.
NOTE: If the HATS/RIDES encoder is not pressed, the operation will time out and the factory reset
will be cancelled. Pressing any button other than the HATS/RIDES encoder will also cancel the factory
reset.

Updating Firmware

The SDRUM's firmware can be updated by connecting a Mac® or PC computer to the SDRUM via the Mini USB
connector. As new firmware updates become available, a firmware update utility program will be made avialable
on the SDRUM product page: http://digitech.com/en/products/sdrum.
35
Factory Reset