SPX OTC 5192 Operating Instructions

SPX Corporation
655 Eisenhower Drive
Owatonna, MN 55060-0995 USA
Phone: (507) 455-7000
Tech. Serv.: (800) 533-6127
Fax: (800) 955-8329
Order Entry: (800) 533-6127
Fax: (800) 283-8665
International Sales: (507) 455-7223
Fax: (507) 455-7063
1. Clean and grease parts to be assembled.
2. Verify needle bearings are in the correct position and are not damaged or missing.
3. Press the bearing cup into the yoke by hand, aligning the holes for the U-joint
cross and the bearing cup bolts.
4. Place the installer onto the bearing cup, threading the bolts into the yoke.
5. Using an impact or hand wrench, turn the forcing screw until the cup is flush to
the yoke.
6. Remove the installer, and assemble the bearing cup bolts.
© 2006 SPX Corporation
Rev. A, August 22, 2006
Bearing Cup Installer
Operating Instructions
for:
injury, wear eye protection that meets
ANSI Z87.1 and OSHA standards.
Form No. 539145
5192
CAUTION: To prevent personal