Advertisement
The Under Axle Jack is an air-operated lifting device designed for jacking loaded trailers and trucks using the
manufacturer's recommended lift points on the chassis.
© SPX Corporation
SPX Corporation
655 Eisenhower Drive
Owatonna, MN 55060-0995 USA
Phone: (507) 455-7000
Tech. Serv.: (800) 533-6127
Fax: (800) 955-8329
Order Entry: (800) 533-6127
Fax: (800) 283-8665
International Sales: (507) 455-7223
Fax: (507) 455-7063
Under Axle Jack
Max. Capacity: 25 Tons
Parts List &
Operating Instructions
for:
Sheet No.
Issue Date: Rev. C, 8-16-02
Form No. 106218
5012A
1 of 4
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SPX 5012A
Summary of Contents for SPX 5012A
- Page 1 Max. Capacity: 25 Tons The Under Axle Jack is an air-operated lifting device designed for jacking loaded trailers and trucks using the manufacturer's recommended lift points on the chassis. Sheet No. 1 of 4 Issue Date: Rev. C, 8-16-02 © SPX Corporation...
-
Page 2: Safety Precautions
Parts List & Operating Instructions Form No. 106218, Sheet 1 of 4, Back Safety Precautions CAUTION: To help prevent personal injury and damage to equipment, • Read, understand, and follow all instructions, including the ANSI B30.1 safety code for jacks. Before using the under axle jack to lift a vehicle, refer to the vehicle service manual for recommended lifting surfaces on the vehicle chassis. - Page 3 Parts List & Operating Instructions Form No. 106218 36 31 32 33 52 35 16 18 20 21 23 19 22 85 22 26 41 42 43 45 39 36 Sheet No. 2 of 4 Issue Date: Rev. C, 8-16-02 © SPX Corporation...
- Page 4 Parts List & Operating Instructions Form No. 106218, Sheet 2 of 4, Back 74, 75 53 55 57 59 62 61 56 60...
- Page 5 5012-42 Release Stem (3/16 dia. x 3/4" lg.) 5012-43 Roll Pin 5012-45 Flex Shaft Sheet No. 3 of 4 j Items marked with an asterisk are Issue Date: Rev. C, 8-16-02 included in Seal Kit No. 222954. © SPX Corporation...
- Page 6 Parts List & Operating Instructions Form No. 106218, Sheet 3 of 4, Back Item Part Req'd Description 5012-47 Branch Tee (1/8 NPT) (3/8-24 x 2-1/4" Ig.) 5012-48 Socket Hd. Cap Screw (1.750 x .320 x .064) 5012-50 Washer (1-5/8 x 1/16 x 2) 5012-51 Backup Ring (.406 OD)
-
Page 7: Preventive Maintenance
1. Open or clean release valve 1. Send jack to OTC authorized service Jack retracts slowly 1. Cylinder damaged internally center for repair 2. Link section is binding 2. Lubricate link section Sheet No. 4 of 4 Issue Date: Rev. C, 8-16-02 © SPX Corporation...
Need help?
Do you have a question about the 5012A and is the answer not in the manual?
Questions and answers