Related Manuals for Elegoo MERCURY XS BUNDLE
Summary of Contents for Elegoo MERCURY XS BUNDLE
- Page 1 00:00 00:00 ELEGOO MERCURY XS BUNDLE Operations Guide More to explore on ELEGOO Amazon Brand Store www.amazon.com/elegoo...
- Page 2 facebook,or Instagram.
-
Page 3: Package List
Package List Main Body Curing Light Curing Turntable Anti-UV Lid Main Body Cleaning Bucket Cleaning Basket Cleaning Basket Bracket Adapter Tools Manual Handheld UV Lamp Safety Goggles... - Page 4 MERCURY X WASH Basic Parameters Machine Name: ELEGOO MERCURY X WASH Time Setting: 0-30mins Control Mode: knob and button control Rated Power: 12W Input Voltage: 100V-240V 50/60Hz Machine Dimensions: 255mm*155mm*385.5mm Machine Net Weight: 2.27kg Cleaning Time Setting: For model with a diameter less than or equal to 30mm, it is recommended to clean the model for 1 minute.
- Page 5 MERCURY XS CURE Basic Parameters Machine Name: ELEGOO MERCURY XS CURE Timing: 0-30mins Control Mode: knob and button control Rated Power: 36W Input Power: 100V-240V 50/60Hz Machine Dimensions：246mm*230mm*363.5mm Machine Net Weight：2.4kg Curing Time: For model with a diameter less than or equal to 30mm, it is recommended to cure the model for 2 minutes.
- Page 6 MERCURY XS HANDHELD UV LAMP Basic Parameters Control Mode: mechanical switch control Size: Φ12mm*65mm (cable length 1000mm) Recommended Distance Range: 20-60mm Lamp Bead Specifications: 405nm Weight: 43g Rated Power: 0.65W Instructions: The handheld UV lamp is ideal for curing assembled models, which ensures seamless assembly of the entire print, and effectively curing the interior of 3D printed parts or nooks and crannies to improve the curing quality of the model.
- Page 7 MERCURY XS BUNDLE Operating Instructions MERCURY X WASH and MERCURY XS CURE can work at the same time through the dedicated adapter that comes with the machine, and the operation mode of the two machines is the same. Please take off the blue protective film on the decoration belt of the machine before use.
- Page 8 MERCURY X WASH Operating Instructions MERCURY X WASH is designed for cleaning printed models. Please turn on the power first and then long press the button to start the machine. Open the sealing lid of the cleaning bucket, add an appropriate amount of washing liquid (the washing liquid can exceed the model and the height of the washing liquid must not exceed the maximum scale), then place the cleaning bucket in the positioning slot on the machine platform.
- Page 9 MERCURY X WASH Operating Instructions a：When the model is within the size of 180mm*121mm*153mm, you can wash the model with build platform. First remove the lid of the cleaning bucket, put the cleaning basket into the cleaning bucket, and then set the cleaning basket bracket into the cleaning basket until it stuck at the bending point of the cleaning basket, and then place the model with platform upon the bracket, (Be careful not to bump the model during placement.)
- Page 10 MERCURY X WASH Operating Instructions b：When the model is out of the size of 180mm*121mm*153mm, then you should clean the model without build platform. Please remove the lid of the cleaning bucket first, put the cleaning basket into the cleaning bucket without the bracket, take the model off the platform directly and put it lightly into the cleaning basket, and finally seal the lid.(Please be sure that the model is placed as flat as possible in the cleaning basket to prevent the sharp corners of the model from going over the grid at the bottom of the cleaning basket...
- Page 11 MERCURY XS CURE Operating Instructions MERCURY XS CURE is specially designed for curing the printed model. For the first use, you need to install the curing lights on the machine by using the tools supplied with the machine. First insert the terminal of the lead wire from the machine shell into the interface below the curing lights, put the extra wires into the machine, and finally use the tools and screws supplied with the machine to fix the two curing lights respectively to the recess of the machine shell.
- Page 12 MERCURY XS CURE Operating Instructions Align the curing turntable with the turntable positioning slot in the center of the body platform and place it tightly. Place the air-dried model in the center of the curing turntable. Put the anti-UV lid on. Turn the knob clockwise to set the curing time. Press the screen briefly to start curing the model.
-
Page 13: Machine Maintenance
Machine Maintenance 1. Recycling of washing liquid When the washing liquid in the bucket is reused more than 30 times, we need to filter and clean the waste. First, leave the washing liquid to stand for about 10 hours, and then after the waste has settled to the bottom of the cleaning bucket, pour the washing liquid on the upper layer of the bucket into another container, then clean the waste at the bottom of the bucket (the waste would be converted into ordinary solid waste in sunlight), if necessary,... - Page 14 2. Clean the impeller of the cleaning bucket After the cleaning bucket has been used for a period of time, the rotor at the bottom may rotate abnormally due to the sediment, then you can remove the rotor for cleaning.
- Page 15 Cautions Please always keep in mind the following precautions when using the ELEGOO MERCURY X WASH machine. Failure to observe these precautions may result in damage to the machine or even cause personal injury. Please contact our customer service first to arrange replacement if any parts are found damaged or missing after receiving the products.
- Page 16 Please adjust the curing time appropriately if the model turns yellow after curing. Over curing will lead to the model yellowing. The ambient temperature of the ELEGOO MERCURY XS CURE machine is recommended to be 0℃ to 40℃, and the humidity is 20% to 50%.
- Page 17 1. The MERCURY XS BUNDLE does not work: Poor power supply contact. Please re-plug the power supply. The anti-UV lid is not covered. Try again after covering the lid. 2. The model turn white after washing and curing: The concentration of alcohol is not enough when using the MERCURY X WASH machine.
- Page 18 00:00 00:00...
Need help?
Do you have a question about the MERCURY XS BUNDLE and is the answer not in the manual?
Questions and answers