LONGER LK5 Pro Faq

Question
1 How long does the overall installation of the machine take?
1 What is the printing size of the machine?
2 Does this machine support dual-color printing?
3 Can it use 3mm consumables?
4 How do you load consumables into the 3D printer?
4 What types of consumables can the machine use?
5 Can the machine be connected to a computer for printing?
6 Can it be used with a local voltage of only 110V?
7 What is the printing layer thickness of the machine?
8 What is the maximum nozzle temperature?
9 What is the maximum temperature of the heated bed?
Does the machine have power outage recovery and
10
filament run-out detection functions?
Are there any requirements for the computer system when
11
connecting the machine?
12 What is the printing speed of the machine?
LONGER LK5 Pro 3D Printer FAQ
Assembly generally takes around 15 minutes, but may vary based on the customer's DIY skills. This 3D Printer comes 90% pre-assembled; refer to
the unboxing and assembly video for specific installation procedures.
Length/Width/Height: 300*300*400 mm
Single nozzle structure, does not support dual-color printing
Only supports consumables with a diameter of 1.75mm
Use 1.75mm filament. Cut a 45° chamfer, then manually guide it through the PTFE tube to the nozzle top after adjusting the extruder assembly
PLA, TPU, ABS, PETG,Wood,Copper,Gradient,etc.
Supports both offline and online printing, generally recommended to print offline
Certainly. Before connecting the power, please identify the yellow cover on the side, peel it off, and manually switch the lever.
Comes with a 0.4mm nozzle, supports precision range of 0.05-0.3mm
250℃.Please beware of high temperature and be careful not to get burned.
100℃.Please beware of high temperature and be careful not to get burned.
The machine supports power-off resume printing function and has a filament run-out detection module.
Currently supports Windows, MAC, etc.
180mm/s
Email: Support@longer3d.com Copyright © Shenzhen Longer 3D Technology CO.,Ltd.All Rights Reserved
Answer / Solution
Setting
Basic Parameter Related