Reese 85357 Installation Instructions

READ THIS FIRST:
Read and follow all instructions carefully before
beginning installation.
LISEZ CECI EN PREMIER:
Lire et suivre toutes les instructions
attenrivement avant le montage.
LEA ESTO PRIMERO:
Lea y siga todas las instrucciones cuidadosa-
mente antes de iniciar la instalación.
6-PIN ROUND CAR SOCKET
INSTRUCTIONS:
1. Insert corresponding Adapter end into 6-Pin Round Car Socket
2. Plug in 4-Flat end into corresponding Trailer end Connector
NOTE: This Adapter is designed make two connectors pictured above work together. Instantly checks electrical circuitry for connectivity.
WARNING
All connections must be complete to function properly. Test and verify installation with a test light, circuit tester or trailer once installed.
WARNING
Overloading circuit can cause fires. DO NOT exceed lower of towing manufacturer rating or:

Max. Right Turn, Left Turn, Stop, & Tail Light Circuits: (7.5 amps)

Max. (+) Battery, Reverse, and Electric Brake Circuits: (30 amps)
 Read vehicle's owner's manual & instruction sheet for additional information. Additional fusing may be required.
Cequent Consumer products
29000-2 Aurora Road
Solon, OH 44139
www.cequentconsumerproducts.com
Installation Instructions
lnstrucciones de instalación
Directives de montage
6-WAY TO 4-WAY ADAPTER
WITH CIRCUIT TESTER
P/N 85357
6 PIN TO 4 WAY FLAT ADAPTER
4-WAY FLAT TRAILER CONNECTOR
IN85357- A 121212