Related Manuals for Electrolux Professional Frytop EFT7 Series
Summary of Contents for Electrolux Professional Frytop EFT7 Series
- Page 1 Frytop EFT7* Installation and operating manual * 59589G300- 2025.03 *Original instructions...
- Page 2 Foreword Read the following instructions, including the warranty terms before installing and using the appliance. Visit our website www.electroluxprofessional.com and open the Support section to: Register your product Get hints & tips of your product, service and repair information The installation, use and maintenance manual (hereinafter Manual) provides the user with information necessary for correct and safe use of the appliance.
-
Page 3: Table Of Contents
Contents A WARNING AND SAFETY INFORMATION....................5 General information ........................5 Personal protection equipment ......................5 General safety ..........................6 Protection devices installed on the appliance ..................6 Safety signs to be placed on the appliance or near its area ..............7 Reasonably foreseeable improper use .................... - Page 4 Electrical models ........................18 H APPLIANCE CLEANING AND MAINTENANCE..................18 Care information......................... 18 Cleaning introduction........................18 Maintenance intervals........................18 Periods of non-use........................19 External parts ..........................19 Other surfaces ........................... 19 Internal parts (every 6 months) ...................... 20 Maintenance contacts (only for Australia)..................20 TROUBLESHOOTING ..........................
-
Page 5: Awarning And Safety Information
WARNING AND SAFETY INFORMATION General information To ensure safe use of the appliance and a proper understanding of the manual it is necessary to be familiar with the terms and typographical conventions used in the documentation. The following symbols are used in the manual to indicate and identify the various types of hazards: WARNING Danger for the health and safety of operators. -
Page 6: General Safety
Stage Protective Safety footwear Gloves Glasses Safety helmet garments ○ ● ○ ○ — Dismantling ○ ● ○ ○ — Scrapping Key: ● PPE REQUIRED ○ PPE AVAILABLE OR TO BE USED IF NECESSARY — PPE NOT REQUIRED During these operations, gloves must be cut-resistant. Failure to use the personal protection equipment by operators, specialized personnel or users can involve exposure to harm to health (depending on the model). -
Page 7: Safety Signs To Be Placed On The Appliance Or Near Its Area
Safety signs to be placed on the appliance or near its area Prohibition Meaning do not remove the safety devices do not use water to extinguish fires (placed on electrical parts) Keep the area around the appliance clear and free from combustible materials. Do not keep flammable materials in the vicinity of the appliance Danger Meaning... -
Page 8: Transport, Handling And Storage
Residual risk Description of hazardous situation Tipping of loads When handling the appliance or the packing containing it, using unsuitable lifting systems or accessories or with the unbalanced load Chemical Contact with chemical substances (e.g. detergent, rinse aid, scale remover, etc.) without taking adequate safety precautions. -
Page 9: Preventive Maintenance
In order to ensure the safety and performance of your equipment, it is recommended that service is undertaken by Electrolux Professional SpA authorised engineers every 12 months, in accordance with Electrolux Professional SpA Service Manuals. Please contact your local Electrolux Professional SpA Service Centre for further details. -
Page 10: Ctechnical Data
Electrolux Professional warranty will be void and manu- subject to local terms and conditions. facturer shall have no liability related thereto in case of any modification of the product or related hardware/ Check on Electrolux Professional website the list of authorized software/programming. customer care. TECHNICAL DATA... -
Page 11: Gas Models
This manual is intended solely for consultation by the operator AS5601 - gas installation, health authorities and any other and can only be given to third parties with the permission of statutory regulations, and the Plumbing Code of Australia (the Electrolux Professional SpA. PCA). Keeping the manual Introduction... -
Page 12: Definitions
• improper appliance use; port personnel. • unforeseeable extraordinary events; Manufacturer Electrolux Professional SpA or any other • use of the appliance by uninformed and / or untrained service centre authorised by Electrolux personnel; Professional SpA. -
Page 13: Unpacking Instructions
• arrange an earthed power socket of suitable capacity for the 6. Turn one of the two plates inside the appliances 180℃ input specified on the data plate; (Fig.1C); • prearrange a high-sensitivity manual-reset magneto-ther- mal circuit-breaker; • prearrange a device lockable in the open position for the connection to the power supply. -
Page 14: Fume Exhaust
E.7.2 Fume exhaust c. screw it tightly onto the bottom connection. • “A1“ type appliances have to be positioned under an extraction hood to ensure removal of fumes and steam produced by cooking; (not relevant for Australian standard). For AUSTRALIA: the ventilation must be in accordance with Australian building codes and kitchen exhaust hoods must comply with AS/NZS1668.1 and AS 1668.2. -
Page 15: Gas Appliances Regulations
6. correct adjustment of supply pressure (see technical data/ E.8.3 Main burner nozzle replacement gas nozzles table) See fig. 2. 7. apply sticker (supplied) with data of new gas type used 1. Remove the control panel and unscrew nozzle “C“; 2. -
Page 16: Electrical Connections
3. Connect a pressure gauge to the appliance’s test point Protect the section of cable outside the appliance with a metal pressure – (see paragraph E.8.1 Supply pressure or rigid plastic tube. checking); WARNING 4. Ignite the appliance’s burners so to have the maximum gas consumption;... -
Page 17: Fnormal Appliance Use
NORMAL APPLIANCE USE WARNING IMPORTANT The Customer must make sure his personnel have Refer to “warning and Safety understood the instructions received and in partic- ular those regarding work hygiene and safety in use Information“. of the appliance. Characteristics of personnel enabled to Basic requirements for appliance use operate on the appliance •... -
Page 18: Electrical Models
Electrical models The thermostat knob “A“ select the required temperature and has the following positions: “Off“ 120: “Minimum temperature“ 140.- “Medium temperatures with positions range ..26- between 140℃ and 260℃“ 280: “Maximum temperature“ The green indicator “C“ signals that the power is on. The yellow indicator “B“... -
Page 19: Periods Of Non-Use
Maintenance, inspections, checks and Frequency Responsability cleaning Appliance structure • Yearly • tightening of main bolts (screws, fixing sys- • Service tems, etc.) of appliance Safety signs • Yearly • check the readability and condition of safety • Service signs Electrical control panel •... -
Page 20: Internal Parts (Every 6 Months)
For service and spare parts, please contact: • Electrolux Professional Australia PTY LTD - Suite 304, 44 Lakeview Drive Scoresby, VIC 3179. PHONE: 1300 368 299 • Zanussi - Luus Industries – 250 Fairbairn Rd, Sunshine West Victoria, 3020 – Call (03) 9240 6822 – Website: www.luus.com.au... -
Page 21: Jappliance Disposal
APPLIANCE DISPOSAL WARNING Depending on the model, the doors must be removed before dismantling the appliance. Refer to “warning and Safety Information“. The symbol on the product indicates that this product should not be treated as domestic waste, but must be correctly disposed of in Procedure regarding appliance disposal order to prevent any negative consequences At the end of the product's life-cycle, make sure it is not... - Page 24 Electrolux Professional SPA Viale Treviso 15 33170 Pordenone www.electroluxprofessional.com...
Need help?
Do you have a question about the Frytop EFT7 Series and is the answer not in the manual?
Questions and answers