Electrolux Professional N7E Original Instructions Manual
Refrigerated base
Hide thumbs
Also See for N7E:
- Quick manual (20 pages) ,
- Installation and operating manual (26 pages) ,
- Installation and operating manual (24 pages)
Subscribe to Our Youtube Channel
Related Manuals for Electrolux Professional N7E
Summary of Contents for Electrolux Professional N7E
- Page 1 Refrigerated base N7E / N9E Installation and operating manual * 59589FF01- 2021.10 *Original instructions...
- Page 2 Installation diagram...
- Page 3 Installation diagram...
- Page 4 Installation diagram...
- Page 5 Installation diagram...
- Page 6 EI – Power supply cable inlet C - Condensate drain (60Hz) EQ – Equipotential...
- Page 7 Foreword Read the following instructions, including the warranty terms before installing and using the appliance. Visit our website www.electroluxprofessional.com and open the Support section to: Register your product Get hints & tips of your product, service and repair information The installation, use and maintenance manual (hereinafter Manual) provides the user with information necessary for correct and safe use of the appliance.
-
Page 8: Table Of Contents
Placing the load, storage and positioning ..................21 Installing a counter top appliance on the refrigerated base ..............22 Joining appliances on refrigerated bases (only N7E models) ..............22 Gas, electricity, water and other connections (if present, depending on the appliance and/or model) ..... 22 Electrical connection ........................ -
Page 9: Awarning And Safety Information
WARNING AND SAFETY INFORMATION General information To ensure safe use of the appliance and a proper understanding of the manual it is necessary to be familiar with the terms and typographical conventions used in the documentation. The following symbols are used in the manual to indicate and identify the various types of hazards: WARNING Danger for the health and safety of operators. -
Page 10: Personal Protection Equipment
Personal protection equipment Summary table of the Personal Protection Equipment (PPE) to be used during the various stages of the appliance's service life. Stage Protective Safety Gloves Glasses Safety garments footwear helmet ● ○ ○ — — Transport — ● ○... -
Page 11: Technical Data
Disconnect the appliance from the power supply before carrying out any installation, assembly, cleaning or maintenance procedure. • Do not remove, tamper with or make illegible the marking and safety, danger and instruction signs and labels on the appliance. • The A-weighted emission sound pressure level does not exceed 70 dB(A). •... -
Page 12: Protection Devices Installed On The Appliance
Protection devices installed on the appliance Guards The appliance has: • fixed guards (e.g. casings, covers, side panels, etc.), fixed to the appliance and/or frame with screws or quick-release connectors that can only be removed or opened with tools; therefore the user must not remove or tamper with such devices. The Manufacturer declines any liability for damage due to tampering or their non-use;... -
Page 13: Residual Risks
• placing in the appliance any objects or things not compatible with its use, or that can damage the appliance, cause injury or pollute the environment; • climbing on the appliance; • non-compliance with the requirements for correct appliance use; •... -
Page 14: Product Loading And Unloading
Product loading and unloading WARNING • Cover or wrap food before placing it in the refrigerator and avoid putting very hot foods or steaming liquids inside. • Do not use mechanical devices or other means to speed up the defrost process, unless recommended by the manufacturer. -
Page 15: Positioning
• Do not spray water or use water jets, steam cleaner or high pressure cleaner. A.17 Preventive Maintenance In order to ensure the safety and performance of your equipment, it is recommended that service is undertaken by Electrolux Professional authorised engineers every 12 months, in... -
Page 16: Parts And Accessories
Electrolux Professional Service Manuals. Please contact your local Electrolux Professional Service Centre for further details. A.18 Parts and accessories Use only original accessories and/or spare parts. Failure to use original accessories and/or spare parts will invalidate the original manufacturer warranty and may render the appliance not compliant with the safety standard. - Page 17 Warranty does not include scheduled maintenance activities (including the parts required for it) or the supply of cleaning agents unless specifically covered within any local agreement, subject to local terms and conditions. Check on Electrolux Professional website the list of authorized customer care.
-
Page 18: Ctechnical Data
Electrolux Professional SpA Viale Treviso 15 33170 Porde- manufacturer none Italy When installing the appliance, make sure the electrical connection is carried out in compliance with that specified on the dataplate. -
Page 19: How To Interpret The Factory Description
The factory description on the data plate has the following meaning: Refrigerated, half size drawers Refrigerated, Doors Electrolux Professional SpA– Viale Treviso 15 – 33170 PN (Italy) Refrigerated, Doors and drawers Electrolux Professional SpA– Viale Treviso 15 – 33170 PN (Italy) Freezer, full size drawers PNC. -
Page 20: Materials And Fluids Used
It is intended for industrial use. Any other use is to be port personnel. considered improper. Manufacturer Electrolux Professional SpA or any other This appliance is manufactured in compliance with the service centre authorised by Electrolux requirements of Directives: Professional SpA. -
Page 21: Enormal Use
the spare parts catalogue (the fitting and use of non-original The Manufacturer declines any liability for damage caused by spare parts and accessories can negatively affect appliance arbitrary modifications and conversions carried out by the user operation and invalidates the original manufacturer or the Customer. -
Page 22: Installing A Counter Top Appliance On The Refrigerated Base
Joining appliances on refrigerated technician. bases (only N7E models) • an all-pole circuit-breaker with minimum contact gap of 3 mm must be fitted between the socket and the power Install the appliance on the right end of the refrigerated base supply line. -
Page 23: Freezer Models
Switching on Lighting up of the incorporated indicator signals that the power is on; 1. Switch on the safety switch upline of the appliance; 3. Activate the digital thermoregulator “A“ by keeping the 2. Press the control panel switch “C“; button “B“... -
Page 24: Periods Of Non-Use
• The condenser fins of the refrigeration (“A“) unit must be • leave the doors open to allow the air to circulate inside, so cleaned at least once every six months, using a brush or a preventing the formation of unpleasant odours; vacuum cleaner;... -
Page 25: Imachine Disposal
Maintenance, inspections, checks and cleaning Frequency Responsability Yearly Service • Extraordinary machine maintenance check all gas components (if present). Every 10 years Service General machine overhaul • check all components, electrical equipment, corrosion, pipes… the machine is designed and built for a duration of about 10 years. After this period of time (from commissioning) the machine must undergo a general inspection and overhaul. - Page 28 Electrolux Professional SPA Viale Treviso 15 33170 Pordenone www.electroluxprofessional.com...
Need help?
Do you have a question about the N7E and is the answer not in the manual?
Questions and answers