Related Manuals for Sanctuary A25S-PLT1815
Summary of Contents for Sanctuary A25S-PLT1815
- Page 1 Models Models | Modèles A25S-PLT1815 SA24S-SEL1917 SA24S-SEL1917-F SA24S-SEL2717 SA24S-SEL2717-F SA24S-SEL3320 SA24S-SEL3320-F 052725 121124 121124...
-
Page 3: Table Of Contents
contents important information registration understanding your safe initial entry lock face installation security code setup silent entry mode internal lighting glass shelf installation locked out of your safe low battery warning securing your safe proper placement & moving of safe keeping your safe dry loading your safe maintenance... - Page 4 Thank you for choosing a Sanctuary safe to protect ® your valuables. We are committed to securing, organizing, and protecting your most important documents, valuables, and keepsakes. If you experience problems or challenges with your safe, please contact us. Many issues can be quickly resolved without the product being returned.
- Page 5 ® place of other safety procedures including advising children of the dangers of firearms. • SA Consumer Products and its distributors of the Sanctuary safes do ® not recommend, suggest, advise, promote, or otherwise condone the ownership or use of firearms.
-
Page 6: Registration
The information you record onto the next page will be required in the event you cannot access the contents of your Sanctuary safe. ®... - Page 7 Please have this information ready prior to calling for technical assistance at: cs@saproducts.com or +1 888 792.4264 Purchase Date Purchase Price (Before Tax) Model Number Serial Number Retailer Name Key Number (if applicable)
-
Page 8: Understanding Your Safe
understanding your safe Backup Key Entry (underneath touchpad) Electronic Lockface 3-Spoke Handle... - Page 9 Reset Interior Button Adjustable Lights Shelves Dead Locking Plates Bolt Active Locking Down Holes Door Organizer Plates Storage Pocket...
-
Page 10: Initial Entry
initial entry NOTE: To avoid damage to flooring or furniture, we recommend laying a protective barrier down before assembling your safe. Locate your backup key and the single spoke inside the plastic bag on the outside of the safe. Install the single spoke by inserting into one of the threaded openings and twist clockwise until the... - Page 11 Insert the backup key into the entry on the door of the safe and turn it clockwise. NOTE: The shorter part of the *Shorter part of key should be inserted upright. the key is upright Turn the handle clockwise to unlock and open the safe door.
-
Page 12: Lock Face Installation
lock face installation Remove lock face from box located inside of safe. Note: Keep door open during installation with keys in hand. The lock face requires 1 x 9V alkaline battery. Locate the battery compartment on the Back of back of the lock face Lock Face and insert the battery. - Page 13 Back of Lock Face Plug cable into the back of the lock face. The cable connector will only fit one 9V BATTERY way into the connector. Align the lock face to the backer plate slightly rotated to the left. Turn clockwise until the lock face clicks into place.
-
Page 14: Security Code Setup
security code setup IMPORTANT: Your safe comes programmed with a factory code of [ 1 5 9 # ]. For maximum security, you must re-program your safe with a new security code. When choosing your new security code, make sure you can operate the unit quickly without making an error. - Page 15 You will hear 2 beeps and the keypad will illuminate indicating that you are in programming mode. Enter your new 3 to 8-digit security code followed by the [ * ] symbol. The lock face will beep twice. Continue setup on next page. INACTIVITY TIMEOUT: If the incorrect security code is entered 3 times you will have an automatic lockout for 30 seconds before you can enter your code again.
- Page 16 security code setup cont. With the door still opened, confirm programming by entering your new code followed by the [ # ] symbol. If code is accepted, the green LED will flash 2 times and touchpad will beep 2 times. If code is not accepted, the yellow LED will flash 3 times and touchpad will beep 3 times.
-
Page 17: Silent Entry Mode
silent entry mode Silent Entry Mode By activating Silent Entry Mode, the safe will no longer make audible sounds when interacting with the safe, allowing for silent access. To turn on Silent Entry Mode, enter the code [ * 6 3 3 ]. To exit Silent Entry Mode, enter the code [ * 6 6 ]. -
Page 18: Glass Shelf Installation
glass shelf installation You will need a Phillips-head screwdriver for this process. Remove the protective film from the acrylic mirror back wall. Locate the tempered glass shelving from the packaging at the bottom of the safe and gather provided hardware. Align each shelving rail to a set of mounting points with the solid flat... - Page 19 Add 2 rubber shelf pads to the top of each shelf rail once all are installed. Once shelving rails are secure, place each shelf on the rails to finish the installation, beginning with the top shelf. Next, locate the remaining spokes inside the safe.
-
Page 20: Locked Out Of Your Safe
locked out of your safe Locked out of your safe? Don’t panic! In the event you are locked out of your safe, use your backup keys to gain access and follow the steps in the Security Code Setup instructions. If you have lost your backup keys, or are still having difficulties, contact customer service at the number below. -
Page 21: Low Battery Warning
low battery warning This safe is equipped with Low Battery Mode. The touchpad will illuminate both the red and green LED lights for 3 seconds. Immediately replace the safe’s battery to avoid being locked out of your safe. Red & Green lights indicate Low Battery Mode NOTE: If the touchpad is accepting your entry code but... -
Page 22: Securing Your Safe
securing your safe WARNING: Your safe is designed to support itself when the door is opened. However, caution should be used to avoid tipping. While securing your safe, be sure to have a second person hold and stabilize the safe to keep it from tipping, causing injury, and/or damaging the safe and surrounding structures. - Page 23 WARNING: Always ensure the safe is in an isolated and dry area. Never place the safe in direct contact with a wet floor. We recommend using a moisture/protective barrier to prevent damage. Use the hardware provided or consult your hardware retailer for fastening hardware for your particular mounting surface.
-
Page 24: Proper Placement & Moving Of Safe
proper placement and moving of safe • To maximize burglary protection and stability, secure your safe to the floor. Failing to secure your safe will void the warranty. • SA Consumer Products recommends that you store your safe in a closet, office, basement, bedroom, or any other location that is convenient for you but out of direct line of sight from prying eyes. -
Page 25: Keeping Your Safe Dry
keeping your safe dry • We recommend placing a moisture/protective barrier between your safe and concrete floor to prevent any moisture, mildew, and rust damage the safe. Installing your safe in a place with climate control (heat in the winter and cooling in the summer) is highly recommended. -
Page 26: Loading Your Safe
loading your safe • Store documents or heat-sensitive items in the bottom of the safe for greatest protection against fire damage. Store ammunition separately from your firearms. • Do not put anything in your safe that will put pressure against the door when it is closed. •... -
Page 27: Maintenance
maintenance • The hinges and internal locking mechanism are permanently lubricated, thus needing no further maintenance. • Opening the door panel of your safe may void your warranty. Always consult our customer service experts prior to doing so. Contact our customer service representatives at: cs@saproducts.com or +1 888 792.4264... -
Page 28: Lifetime Warranty
SA Consumer Products, Inc. will repair or replace, at their sole discretion, any Sanctuary Safe damaged by fire, forced entry, ® forced attack, or natural flood for the lifetime of the original owner. SA Consumer Products, Inc. will repair or replace, at their sole... - Page 29 SA Consumer Products, Inc. shall only be responsible and liable when the safe is used in compliance with the directions specified in your new Sanctuary Safe User Manual. ® Failing to secure your safe properly to the floor per instructions in the User Manual will void the warranty of the safe.
- Page 30 @sanctuary_safes saproducts.com cs@saproducts.com +1 888.792.4264...
Need help?
Do you have a question about the A25S-PLT1815 and is the answer not in the manual?
Questions and answers