Video Menu; How To Select Picture Mode; How To Customize Video Settings - Haier LE32N1620 Owner's Manual

Video menu

Press the MENU button and then use the
to select the Video menu.
Picture Mode
Brightness
Contrast
Color
Audio Tint
Sharpness
Channel
Function
Lock
Note
Depending on the active input mode, one or more
menu items may not be selectable.

How to select picture mode

settings: User, Mild, Standard, Vivid and Movie.
1
Press the MENU button and then use the
button to select the Video menu.
2
Press the / ENTER button and then use the
/ button to select
3
Press the / button to select the option User,
Mild, Standard, Vivid and Movie.

How to customize video settings

1
Press the MENU button and then use
button to select Video menu.
2
Press the / ENTER button and then use
/ button to select the desired items.
3
Press the / ENTER button and then use
/ button to adjust the setting.
Picture Mode
Select the picture mode
Movie).
Brightness
This will adjust the light output of the complete
picture. This will mainly affect the darker areas of the
picture.
/ button
User
50
50
50
0
10
Enter Move Exit
/
Picture Mode.
the /
the
the
(User/Mild/Standard/Vivid/
Contrast
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
Color
This will adjust the saturation level of the colors to suit
your personal preference.
Tint
Allows you to select the color mix (Tint) of the picture.
Sharpness
This will adjust the sharpness of fine details in the
picture.
Note
Video adjustments are only available in the User
mode.
If adjustments are attempted in any of the other
Picture modes the system will automatically switch
to the User mode.
Only when the picture mode is set to User can the
Brightness, Contrast, Color, Tint, Sharpness and
Color Temperature be adjusted. All other Picture
Modes are preset.
Color temperature
This will increase or decrease Warm (red) and Cool
(blue) colors to suit your personal preference.
Select Cool to give the white
to give the white colors a neutral tint, Warm to give
the white colors a red tint.
Advanced Video
To adjust the picture in advanced: DNR, MPEG NR,
Adaptive Luma Control, Flesh Tone, DI Film Mode, Blue
Stretch, Game Mode, HDMI Mode and Overscan.
DNR: Digital Noise Reduction. Adjust to reduce
the appearance of errors caused by compression:
MPEG NR: Adjust the MPEG Noise Reduction level:
Adaptive Luma Control: Adjust changes in the
luminance of the picture:
Flesh Tone:
Low or Medium.
Over Scan: This function is active and visible in
menu only when the signal is ELA timing (480i/480p/
720p/1080i/1080p) in RGB color space in HDMI/DVI
input
The function could only be selected when you input
the HDMI RGB signal by the HDMI source.
Blue Stretch: Set Blue Stretch: On or
Operation
colors a blue tint, Normal
Low.
Haier LED HDTV EN-18
.