Introduction Controls - Haier LE32N1620 Owner's Manual

Introduction
Introduction
Controls
This is a simplified representation of the TV front panel, side panel control buttons and side inputs.
TV Side panel controls and connections
Press to view the system menu on the TV screen.
MENU
Use the system menu to adjust the TV's options.
Press to change the active input source. Each
INPUT successive press will change the input source
mode.
VOL +/- Press to adjust the volume level.
Press to change the channel. Press and hold to
CH +/-
scan quickly through channels.
Press to turn the TV on or to place it in standby
POWER
mode (off).
Receives IR signals from the remote control.
Remote Sensor Do not put anything near the sensor to avoid
blocking the remote control signal.
Lights red when the TV is off (standby).
Power indicator Lights green when the TV is on.
Flashes green and red while the TV is turning on.
Note
In the MENU screen:
INPUT serves as the ENTER button
VOL +/- serve as left/right buttons
CH +/- serve as up/down buttons.
EN-5 Haier LED HDTV
2
1
6
3
7
4
5