Related Manuals for Wascomat S7-75
Summary of Contents for Wascomat S7-75
- Page 1 User manual Washer extractor S7–75, S7–85, S7–105, S7–130 S7–180, S7–250, S7–330 Type W3... 438909663/GB, IE Original instructions 2024.05.02...
-
Page 3: Table Of Contents
Contents Contents 1 Safety Precautions ..........................5 General safety information......................6 Commercial use only........................6 Copyright ..........................6 Symbols............................6 2 Program description ..........................7 General.............................7 Program description ........................7 3 Handling .............................9 Load ............................9 Detergent ..........................9 How to start the machine ......................11 3.3.1 General, OPL......................... 11 3.3.2 Coin operated machines .................... -
Page 5: Safety Precautions
User manual 1 Safety Precautions • Servicing shall be carried out only by authorized personnel. • Only authorized spare parts, accessories and consumables shall be used. • Only use detergent intended for water-wash of textiles. Never use dry cleaning agents. •... -
Page 6: General Safety Information
The machine/machines covered by this manual is/are made for commercial and industrial use only. 1.3 Copyright This manual is intended solely for consultation by the operator and can only be given to third parties with the permis- sion of Wascomat company. 1.4 Symbols Caution... -
Page 7: Program Description
User manual 2 Program description 2.1 General The machine is equipped with a number of programs adapted to the range of use to which the machine is intended — different segments use different programs. The following program description is a short description of some exam- ples of programs that can be used. - Page 8 User manual The following table shows some examples of available programs used on coin operated machines and a short de- scription of those: Program Description Cotton and terry. COLD 40°C. For an optimal result, full load is recommended. WARM Cotton and terry. 60°C.
-
Page 9: Handling
User manual 3 Handling 3.1 Load Load the goods into the machine according to recommendations and close the door. Maximum load S7–75 8 kg S7–85 9 kg S7–105 11 kg S7–130 14 kg S7–180 20 kg S7–250 28 kg S7–330 35 kg 3.2 Detergent Add the correct amount of detergent, bleach and softener according to recommendations. - Page 10 User manual Note! Make sure no detergent spills out on the floor causing risk of slipping and falling. Note! If bleach is used, be careful when handling liquid bleach. Take care when opening the detergent container and when filling the compartment with liquid bleach. Avoid splashing due to the risk of getting liquid bleach in your eyes.
-
Page 11: How To Start The Machine
User manual 3.3 How to start the machine This manual cover different types of machine models. Check the panel on your machine and follow the description for your type of machine. 3.3.1 General, OPL Select program by turning the control knob. Example of programs NORMAL Different temperatures can be selected. -
Page 12: Additional Functions
User manual 3.4 Additional functions There is a menu with additional functions available for selection after start. When pressing the control knob / start but- ton (on machines without control knob) the menu will appear on the display. Select from the menu by turning the control knob / pressing the temperature button/-s and press the control knob / start button to activate. -
Page 13: When Program Has Ended
User manual Auto restarts Select AUTO RESTARTS and activate. Set the number of automatic restarts that the machine will perform of the selected program. Press the control knob / start button to confirm the settings. 3.5 When program has ended Leave the door open when ready. -
Page 14: Timer
User manual 4 Timer The timer is used to start a part of the program (for example the last rinse of the udder cloth program) after pause on a pre-set time. The time can be set for all days or for selected days. To program the timer you need to activate the machines service mode. -
Page 15: Error Codes
User manual 5 Error codes A fault in the program or in the machine is indicated by an error code on the display. Some of these error codes can be solved easily without contacting service personnel. Error Text Cause/Action code 11:1 NO WATER Water level acknowledgement not reached in time. -
Page 16: Maintenance
User manual 6 Maintenance 6.1 General It is the responsibility of the owner of the machine/the laundry manager to make sure that maintenance is periodically performed. Note! Lack of maintenance may deteriorate the performance of the machine and may cause damage to components. -
Page 17: Drain
User manual 6.5 Drain At regular basis, check the drain connection, joints in the drain pipe etc and remove any lint and dust. Clean with for example a small brush. When remounting, make sure the connections are tight. fig.6998A Note! Contact qualified service personnel to perform maintenance on the internal drain and hoses once a year. -
Page 18: Cleaning The Mop Elements
User manual 6.7 Cleaning the mop elements (Only valid for mop machines). At regular basis, check the mop elements and clean if necessary. In the inner drum, there is one or two core covers to the heating elements depending on the size of the machine. The front cover is located directly above the drain and the other is in front of the element retainer. -
Page 19: Disposal Information
User manual 7 Disposal information 7.1 Disposal of appliance at end of life Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of the structure that can give or break during scrapping. The machine’s parts must be disposed of in a differentiated way, according to their different characteristics (e.g. - Page 22 Electrolux Professional AB 341 80 Ljungby, Sweden Share more of our thinking at www.wascomat.com...
Need help?
Do you have a question about the S7-75 and is the answer not in the manual?
Questions and answers