Kyocera KM-F1050 User Manual page 67

KMnet Admin 2.0
Prohibit
Print jobs without a valid Account ID are cancelled.
Restriction Mode: Select function restriction and balance limit mode:
Auto
Sets account function restriction and balance limit for all account counters to
"On." This assures that the settings always remain on.
Manual
Account function restriction and balance limit remain unchanged. A user can
control the settings from other applications or on the printing device.
Accounting Mode: Select check boxes to enable accounting management for
available printing device features:
Print accounting management
Copy accounting management
Scan accounting management
FAX accounting management
Cancel on Balance Error: Select whether to cancel a print job when the
counter balance exceeds the limit:
Do not Cancel, only Warn
Lets the print job proceed and issues a warning.
Cancel from the next Job
Allows the current print job and stops all future print jobs sent after the limit is
exceeded.
Stop printing and cancel
Stops the current print job.
Cancel on Account Error: Select whether to cancel a print job that is sent with
no account code:
Do not Cancel, only Warn
Lets the print job proceed and issues a warning.
Cancel
Stops the current print job.
Error Report Output: Select to print a one-page error report when the user
makes an error:
On Account-code Error
The user enters an invalid account code.
On Over-limit Error
A print job is sent that exceeds the allowed balance.
Common Settings
Change Review Number
Displays the number of times the accounting settings have been changed in
the printing device, either from KMnet Admin or at the device.
Auto Reset Counters
Displays the current counter renewal schedule.
Number of Accounts
Accounting Manager
4-10