Enabling A Disabled Console; Log Off - Kyocera KM-F1050 User Manual

Administration

Enabling a Disabled Console

1
2
3

Log Off

2-12
You can enable a console that has been disabled.
In the navigation area, select Consoles.
Select the disabled console to enable from the list in the right pane.
Click Enable Console.
The console status changes to Enabled. The console is available in all Switch
Console lists.
To log off from the application, in the navigation area, click Switch Console,
then select log off.
A user is automatically logged off if the software is not used for 30 minutes.
User Guide