Close Call Delay; Close Call Ctcss/Dcs Search - Uniden BC125AT Owner's Manual

Close Call Delay

This setting controls how long the scanner stays on the
frequency after a transmission ends before resuming Close Call
operation. If you select a minus delay time, the scanner stops
on the transmission for the preset time and then automatically
resumes scanning. (Default = 2 seconds)
Press Func then Hold to view the Close Call menu.
1.
Scroll to Set Delay and press Pgm/E.
2.
3. Scroll to select the delay time from following options:
• -10 sec - resumes after 10 seconds.
• -5 sec - resumes after 5 seconds.
• 0 sec - resumes immediately.
• 1 sec - waits 1 second for a reply then resumes.
• 2 sec - waits 2 seconds for a reply then resumes.
• 3 sec - waits 3 seconds for a reply then resumes.
• 4 sec - waits 4 seconds for a reply then resumes.
• 5 sec - waits 5 seconds for a reply then resumes.
Press Pgm/E to save and return to the Close Call menu.
4.

Close Call CTCSS/DCS Search

This setting controls whether the scanner will search for a
subaudible tone when it stops on a transmission during Close
Call operation. (Default = On)
Press Func then Hold to view the Close Call menu.
1.
Scroll to CTCSS/DCS Search and press Pgm/E.
2.
3. Scroll to select one of the following options:
63