Custom Search Receive/Hold Modes - Uniden BC125AT Owner's Manual

To start a Custom Search, press Srch/Svc. When the scanner
finds a transmission, it stops on it. When the transmission ends,
the scanner resumes searching according to the delay setting.
While searching, the upper line displays the current search bank
name. The lower line displays the search frequency and the
direction indicator (↑or ↓) with the modulation.
Enabled search banks appear on the lowest line. Disabled search
bank numbers are not displayed. The currently searched bank
number flashes.
• You can turn search banks on/off by using 1-9 or 0. One
search bank must always be enabled. If you turn off all search
banks, the scanner will display Nothing to Srch.
• If you want to change the search direction or if it is a long
transmission and you want to continue searching, turn
SCROll CONTROl or press Srch/Svc.

Custom Search Receive/Hold Modes

To hold on a frequency, press Hold. To step through the
frequencies, turn SCROll CONTROl in Hold mode. Press Hold
to resume searching.
While monitoring a transmission, the upper line displays the
current search bank name and the lower line displays the
current frequency with the direction indicator (↑or ↓)
The modulation, Priority mode icon (if priority is enabled), any
CTCSS/DCS received (if enabled), and the Close Call icon (if CC
Pri or CC-DND is enabled) will also appear in the display.
Numbers at the bottom of the display show the enabled service
search banks. The currently searched bank number flashes in
Receive mode.
51