Programming Scan Channels
1. Select which Scanning Mode you wish to use OS or GS Mode.
OS is indicated by the absence of the GS icon.
2. Select the channel you want to store by pressing
. M appears and a short tone beep is heard.
4. To remove the channels from Memory, press
A short tone beep sounds and M disappears.
The Priority Channel feature allows user to monitor one of 40 channels in the
uh078sx , monitoring it every 1.5 secs. during Group Scanning.
Choosing a Priority Channel
four times. PRI and the priority
channel number flashes.
channel. Channel 10 example is shown.
If OFF is selected then priority channel watch during
group scan will be inactive.
Press and hold
While scanning, the uh078sx stops at a busy channel and receives a
transmission. When the received signal is over, the unit will wait for 3 seconds
for the return of the signal, otherwise, the radio resumes scanning.
to select the desired priority
to store setting.
o nce more.