Clearing A Bank; Scanning.stored.channels - Uniden BC125AT Owner's Manual

Clearing a Bank

You can delete all channels in a bank.
Press Hold to select any channel in the bank, then enter
1.
that channel number.
Press Pgm/E to enter the Channel menu. (You can also
2.
press Hold and scroll to the channel; press Func then
Pgm/E.)
Scroll to select Clear Bank and press Pgm/E.
3.
4. To clear the Close Call Hits bank, turn off the scanner and
turn it back on.
At Confirm Clear?, press Pgm/E to clear the bank or . Clr
5.
to cancel and return to the Channel menu.

scanning.stored.channeLs

Press Scan to begin scanning channels.
The scanner scans through all unlocked channels in the enabled
banks in channel order. When the scanner finds a transmission,
it stops on it.
When the scanning of all normal banks ends, the scanner
scans a channel storage bank that is named Close Call Hits (if
enabled). This is a storage bank that automatically stores found
frequencies with any Close Call mode. You will see Close Call
Hits on the display. If the Close Call Hits bank is empty, the
scanner does not scan this bank.
In Scan mode, the upper line displays the current channel bank
number and the lower line displays and scrolls SCAN from right
to left with the direction indicator (↑or ↓).
44