Weather.alert.standby - Uniden BC125AT Owner's Manual

Note 1: NOAA broadcasts are continuous broadcasts. You only lose
reception if you move out of a coverage area. If the signal is lost, the
scanner resumes searching for a weather transmission.
Note 2: You cannot lock out weather frequencies.

Weather.aLert.standBY

In Weather Alert mode, your scanner functions as a severe
weather warning radio. This is especially useful when your area
is expecting severe weather conditions late at night. When you
set the scanner to Weather Alert mode, it scans the weather
channels, but does not play the channel's audio.
To turn Weather Alert Standby on or off, press Func then
3(WX) to view the Weather menu.
Scroll to Weather Standby and press Pgm/E.
The upper line displays WX Alert Standby and the lower
lines display the channel number with the frequency and
modulation.
When the scanner detects the Weather Alert Tone (1050Hz), the
scanner goes into Hold mode, immediately sounds a Weather
Alert siren and displays WX Alert Warning. This siren sounds as
long as the Weather Alert Tone (1050Hz) is broadcasted.
Pressing any key stops the siren, opens the squelch, then
monitors the Weather channel.
To exit Weather Alert Standby mode, press Scan.
65