Uniden BC125AT Owner's Manual page 60

Handheld scanner
Hide thumbs Also See for BC125AT:
Table of Contents

Advertisement

When the scanner finds a frequency, CCFOUND! appears in
the display. The scanner will also beep or flash the display (if
enabled) in the Close Call Alert option in the Close Call menu.
• Press any key (other than Hold) to view the displayed
frequency.
While monitoring a Close Call transmission, the scanner displays
Close Call on first line and the monitoring frequency on the
second line.
The modulation and any CTCSS/DCS received (if enabled) will
also appear on the display.
Numbers at the bottom of the display show the enabled Close
Call bands. The currently searched band number flashes.
When the transmission ends, the scanner resumes searching
according to the delay setting.
To hold on a frequency, press Hold.
To start a Quick Search at the current frequency, turn the
SCROll CONTROl in Hold mode and press Hold to start
searching.
To cancel the hit, turn the Scroll Control.
To temporarily lock out a frequency, press any key then l/O.
To permanently lock out a frequency, press any key then l/O
twice quickly.
To store a frequency, press Pgm/E. See Storing Found Search
Frequencies on page 55.
To exit Close Call Only mode, press Scan.
60

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents