Download  Print this page

TP-Link MC100CM User Manual page 11

Fast ethernet media converter/wdm fast ethernet media converter
Hide thumbs

Advertisement

Name
Status
PWR
LFP
FX
Link/Act
Flashing
SPD
Flashing
FDX/Col
TP
Flashing
Link/Act
On
Power on
Off
Power off
On
The Link Fault Pass Through function enable.
Off
The Link Fault Pass Through function disable.
On
There's a valid link.
The converter is receiving or transmitting
data from the fiber optic connector.
Off
There's no valid link.
The TP port is connected to 100Base-Tx
On
The TP port is connected to 10Base-Tx
Off
device or no connection.
The TP port is operating in Full-Duplex
On
There's a collision.
Off
The TP port is operating in Half-Duplex mode.
On
There's a valid link.
The converter is receiving or transmitting
data from the TP port.
Off
There's no connection on the TP port.
5
Indication

Advertisement

loading

  Also See for TP-Link MC100CM

  Related Manuals for TP-Link MC100CM

This manual is also suitable for:

Mc110csMc111csMc112cs