TABLE OF CONTENTS 1. Safety Instructions………………………………………………………………………………3 Technical Specifications…………………………………………………………………………4 Control Menu ……………………………………………………………………………………5-7 DMX Channel ……………………………………………………………………………………7-20 Dimension………………………………………………………………………………………21-22 Trouble Shooting…………………………………………………………………………………23 Fixture Cleaning………………………………………………………… ………………………23 STATEMENT The product has well capability and intact packing when leave factory. All of the user should comply with warning item and manual, any misuse cause of the damages are not included in our guarantee, and also can not be responsible for any malfunction &...
1.Safety Instructions Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. •Unpack and check carefully there is no transportation damage before using the unit. •Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
2.Technical Specifications Light Source: AC90-240V, 50/60HZ 400W power consumption Light source:672*0.2w RGB+224*2W white LED Led Segments: RGB:3*16 sections; White: 2*16 sections Control: DMX512, RDM, Master-Slave, Auto DMX Channel: 4/88/14/190/30 CH Construction: Four side of bar can be freely spliced LCD display Strong aluminum housing and IP65 cooling fan Rich build-in color &...
Control Menu A.Function B.+ key C.- key D.Confirm (Lock password:Confirm A-B-C-D) 1.LCD display function (The number in the main menu list is the default value of this item) (Press and hold the OK button for 2 seconds in any of the following interfaces to display the temperature, release and restore) Main menu Function Description note...
Page 6
B-M 00 White macro function Pattern :00-27 B-S *99 pattern Speed :00-99 White macro function * become -:mean the item is selected speed B-M 00:Do not execute White lighting effects B-M 01:White pulse B-M 02:White jump B-M 03:Summary of White Patterns B-M 04-27:Various patterns S-M 00 Sound mode...
Attention: The lamp body needs to be connected to a temperature control resistor before this function can be activated D-State OFF/ HOLD In DMX mode, the data status of the LED after signal interruption. OFF: The data will be cleared later HOLD: Data retention Screen OFF/ON...
Page 8
..000-255 .... 70CH 000-255 R47-48 dimming Linear dimming. From dark to bright, controlling R24 section 71CH 000-255 G47-48 dimming Linear dimming. From dark to bright, controlling G24 section 72CH 000-255 B47-48 dimming Linear dimming. From dark to bright, controlling B24 section 73CH 000-255 W1-2 dimming...
Page 11
000-255 G Dimming Linear dimming, from dark to bright, can be used as color selection for macro functions 000-255 B Dimming Linear dimming, from dark to bright, can be used as color selection for macro functions RGB Strobe Strobe,from slow to fast 6-255 0-5 6-12...
Page 12
13CH 6-255 W Strobe Strobe,from slow to fast 1-128 The effect runs in the forward direction The effect runs in the reverse direction. Function reversal and 129-255 [There are some effects that are not significantly different 14CH refresh after commutation] When the push rod exceeds 50 or commutes, the macro function refreshes 190CH(When the 14 channels act in reverse, the point-controlled dimming will also be reversed.)...
Page 16
15CH 000-255 R1 Dimming Linear dimming, from dark to light, control red 1 16CH 000-255 G1 Dimming Linear dimming, from dark to bright, control green 1 17CH 000-255 B1 Dimming Linear dimming, from dark to bright, control blue 1 ..000-255 ..
Page 19
Color macro function black field background color 223-255 red(from dark to light) 000-255 R Dimming Linear dimming, from dark to bright, can be used as a macro function for color selection 000-255 G Dimming Linear dimming, from dark to bright, can be used as a macro function for color selection 000-255 B Dimming...
Page 20
11CH 000-255 White macro function From slow to fast (when the speed is zero, the macro function speed will not be executed) 12CH 000-255 W Dimming Linear dimming, from dark to bright, can be used as a macro function for color selection 13CH 000-255 W Strobe...
6.Trouble Shooting Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: A. The unit does not work, no light and the fan does not work 1. Check the connection of power and main fuse. 2.
Need help?
Do you have a question about the IP-S400 and is the answer not in the manual?
Questions and answers