H3C LS-3100-16TP-EI-H3-A-O Installation Manual page 92

Installation Manual
H3C S3100 Series Ethernet Switches
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):abc
331 Give me your password, please
Password:
230 Logged in successfully
[ftp] get s3100-SI.bin
[ftp] get s3100-SI.btm
[ftp] bye
Step 2: Update the Boot ROM program on the switch.
<H3C> boot bootrom s3100-SI.btm
please wait ...
Bootrom is updated!
Step 3: Update the host program on the switch.
<H3C> boot boot-loader s3100-SI.bin
<H3C> display boot-loader
Unit 1:
The current boot app is: s3100-SI.bin
The main boot app is:
The backup boot app is:
Step 4: Restart the switch.
<H3C> reboot
Note:
Before restarting the switch, make sure other configurations are all saved to avoid the
loss of configuration information.
After the above operations, the Boot ROM and host software loading is completed.
Pay attention to the following:
Host software loading takes effect only after you restart the switch with the reboot
command.
If the space of the flash memory is not enough, you can delete the useless files in
the flash memory before software downloading.
No power-breaking is permitted during software loading.
Chapter 5 Boot ROM and Host Software Loading
s3100-SI.bin
5-12