Table of Contents
Advertisement
Installation Manual
H3C S3100 Series Ethernet Switches
Figure 5-3 Call and disconnect buttons
Note:
The new bits per second takes effect only after you disconnect and reconnect the
terminal emulation program.
Step 6: Press <Enter> to start downloading the program. The system displays the
following information:
Now please start transfer file with XMODEM protocol.
If you want to exit, Press <Ctrl+X>.
Loading ...CCCCCCCCCC
Step 7: Choose [Transfer/Send File] in the HyperTerminal window, and in the following
popup dialog box click <Browse>, select the software you need to download, and set
the protocol to XModem.
Figure 5-4 Send file dialog box
Step 8: Click <Send>. The system displays the following page.
Chapter 5 Boot ROM and Host Software Loading
5-6
Hide quick links:
Advertisement
Table of Contents
