Related Manuals for Siegenia KFV axxent
Summary of Contents for Siegenia KFV axxent
- Page 1 ASSEMBLY INSTRUCTIONS axxent door hinge for aluminium doors Window systems Door systems Comfort systems...
-
Page 3: Table Of Contents
Assembly instructions axxent door hinge for aluminium doors Content INTRODUCTION .........4 Producer and Service ........4 Validity ............4 1.3. Target.group.of.this.documentation ..... 4 Intended use ..........4 1.4.1. Installation.location ........4 1.4.2 Miscellaneous ..........4 Improper use ..........4 Maintenance and service notes ....4 1.7. -
Page 4: Introduction
KFV or by a service agent authorised by KFV. Manufacturer and Service • An.opening.restrictor.is.absolutely.essential: KFV Karl Fliether GmbH & Co. KG A company of the SIEGENIA GROUP Siemensstraße 10 42551 Velbert Tel.: +49 2051 278-0 Fax: +49 2051 278-167 E-mail: info@kfv.de... -
Page 5: Installation.conditions.and.requirements
Assembly instructions axxent door hinge for aluminium doors • When. treating. surfaces. (e.g.. painting. or. glazing. Transport the. front. doors),. remove. all. hardware. compo- • Block set the door leaf in the frame with door gap nents and protect them from any stains which restrictors. -
Page 6: Symbols Used
Assembly instructions axxent door hinge for aluminium doors 1.10 Symbols used Other types of indicators The following icons are used in this document: Below.is.a.list.of.symbols.used.in.these.instructions.and. their meanings: General warning symbol • Items of text following this marker are found in lists. Useful.information.or.advice –... -
Page 7: Heavy Components
This presents a risk of foot injuries. Wear safety footwear Sharp edges Cropping metal components creates sharp edges. This presents.a.risk.of.cutting.injuries. Wear safety gloves Swarf flying around rapidly During.milling.work,.there.will.be.swarf.flying.around. rapidly. This presents a risk of eye injuries. Wear safety goggles Liability Please.refer.to.our.General.Terms.and.Conditions.of.Bu- siness.to.see.our.liability.and.warranty.conditions. www.siegenia.com/de H39.HTBLMS001EN-02 05.2019 7/18... -
Page 8: Component Overview
Assembly instructions axxent door hinge for aluminium doors Component overview Item Component Material number Frame part TBV RT7… Sash part TBV FT7… Cover cap TBV AK7…TBV AK7… M6 clinch nut TBX ZU003 Screw cases Profile-specific Attachment.part Profile-specific Countersunk screws M6 x 25/M6 x 40 DIN965, T 30 TBX.ZU001./.profile-dependent 8/18 05.2019... -
Page 9: Size Variants
Assembly instructions axxent door hinge for aluminium doors Size variants The following table displays the maximum permissible load values of the axxent door hinge, taking into considera- tion.the.interaction.between.the.height.(interval.between.the.bottom.to.the.top.axxent.door.hinge).and.the.width. of the door leaf. On the basis of a hinge clearance of 1435 mm, the maximum permissible weight of the door leaf of 120 kg decrea- ses from a door leaf width of 1001 mm. -
Page 10: Installation Steps
Assembly instructions axxent door hinge for aluminium doors Installation steps Assembly step 1: milling the frame For.detailed.milling.and.drilling.specifications.please.refer.to.the.profile-specific.milling.drawing. Ø10 Milling offset Door leaf Frame 10/18 05.2019 H39.HTBLMS001EN-02... -
Page 11: Assembly Step 2: Milling The Sash
Assembly instructions axxent door hinge for aluminium doors Assembly step 2: Milling the sash For.detailed.milling.and.drilling.specifications.please.refer.to.the.profile-specific.milling.drawing. Ø6 Ø12 H39.HTBLMS001EN-02 05.2019 11/18... -
Page 12: Assembly.step.3:.Inserting.the.cover Cap Into The Door Frame
Assembly instructions axxent door hinge for aluminium doors Assembly step 3 - Inserting the cover cap into the door frame 12/18 05.2019 H39.HTBLMS001EN-02... -
Page 13: Assembly Step 4: Installing The Frame Part
Assembly instructions axxent door hinge for aluminium doors Assembly step 4 - Installing the frame part Step 1 (optionally) Mounted on rear side min. 1 locking screw Protrusion of installed clinch nut: Height max. 0.5 mm, Ø max. 10 mm Step 2 Step 3 M6 x 25/M6 x 40... -
Page 14: Assembly Step 5: Installing The Sash Part In The Door Leaf
Assembly instructions axxent door hinge for aluminium doors Assembly step 5: Installing the sash part in the door leaf Step 1 (optionally) Protrusion of installed clinch nut: Height max. 0.5 mm, Ø max. 10 mm Step 2 Step 3 M6 x 25/M6 x 40, T 30 max..tightening.torque:.7.±.1.Nm 14/18 05.2019... -
Page 15: Assembly Step 6: Suspension Of The Door Leaf
Assembly instructions axxent door hinge for aluminium doors Assembly step 6: suspension of the door leaf Prior to suspension, loosen the security device and turn downwards. M4, T 15 max..tightening.torque:.2.8.±.0.5.Nm After.the.suspension,.turn.the.security. device.upwards.and.screw.into.place! Especially suitable for adjustment, Material description Material number TBX ZU002 Screwdriver TX---XXP010 3508880 H39.HTBLMS001EN-02... -
Page 16: Assembly.step.7:.Adjustment.options
Assembly instructions axxent door hinge for aluminium doors Assembly step 7: Adjustment options • Perform adjustments with the unit installed. • Always adjust all door hinges synchronously. • During.the.elevating.adjustment,.ensure.that.the.top.hinge.bears.the.load.in.a.controlled.manner.. Height adjustment + 4 mm - 2 mm Side adjustment + 8 mm - 2 mm Adjusting the compression + 1.5 mm... - Page 18 www.siegenia.com...
Need help?
Do you have a question about the KFV axxent and is the answer not in the manual?
Questions and answers